Upcoming Webinar: Robust Solutions for Connected Systems in Buildings x
COVID-19 Digi Technical Support Response x

Knowledge Base

What would you like to know?

Option 1: Less hardware development@BL4S200 (or BL4S210 depending on the type of Ethernet and memory they require)20-101-1220 BL4S200101-1270 BL4S200 tool kithttp://www.digi.com/products/wirele... https://www.digi.com/support/knowledge-base/migration-from-op7100-to-newer-rabbit-solution Jul 06, 2017
Essentially, what you are asking is if you can clone a board. @For cloning to work you need a cloning board available from Digi at this link@http://store.digi.com/index.cfm?currentpage=2@fuseaction... https://www.digi.com/support/knowledge-base/how-can-i-copy-the-program-from-one-rabbit-module Jul 06, 2017
The following is from an Ask Larry article:@ Let me first say to please keep in mind that the Rabbit processors do not have any internal program memory. Because of this, anyone who has physical ac... https://www.digi.com/support/knowledge-base/how-can-i-protect-my-code-once-i-transfer-it-to-th Jul 06, 2017
First, as to how your ID block probably got corrupted.@ Runaway code can certainly cause flash corruption, such as an erased ID block, and is usually very difficult to debug. Some things to check f... https://www.digi.com/support/knowledge-base/how-did-my-rabbit-rcm6600w-id-block-get-corrupted Jul 06, 2017
Note: This information is general to the Rabbit 4000 and certain pins may not be available on your product.The first thing I want to do is to point you to our Rabbit 4000 Processor Easy Reference P... https://www.digi.com/support/knowledge-base/setting-up-digital-io-in-dynamic-c-for-rabbit-4000 Jul 06, 2017
Some of our Dynamic C RPU (Remote Program Update) sample programs do not update firmware without resetting the board. @This is not always possible if the board is in a remote location and you are a... https://www.digi.com/support/knowledge-base/remote-program-update-sample-programs-don-t-update Jul 06, 2017