Support / Product Detail

Digi Transport WR41

Toggle all

tDocumentation
Getting Started Guides
Digi TransPort WR41 Quick Start Guide
Digi TransPort WR41 Quick Start Guide for non-Cellular versions
User Manuals
Digi TransPort User Guide
Digi TransPort Telemetry 1 I/O Interface User Guide
Digi TransPort Telemetry 2 I/O Interface User Guide
Digi Remote Manager User Guide
TransPort WR41 Utility Installation Guide
Reference Manuals
Digi Transport WR41 Data Sheet
Digi Remote Manager Programming Guide
Application Notes
AN02 - Using the TCPDIAL & TCPPERM Commands to Connect Two TransPort router Serial Interfaces Over TCP/IP.
TCPPERM, TCPDIAL, Reverse telnet, Serial terminal server, MultiTX
AN02 - Using the TCPDIAL & TCPPERM Commands to Connect Two TransPort router Serial Interfaces Over TCP/IP.
TCPPERM, TCPDIAL, Reverse telnet, Serial terminal server, MultiTX
AN07 - How to configure TransPort WR for Cellular Problem Detection and Recovery using Sure Link Wizard
Link failure detection and recovery methods, also includes the SureLink wizard
AN09 - Using IPsec over a mobile network from a Digi TransPort router to a Cisco router
AN10 - IPSec over Cellular using Digi TransPort Routers with Pre-Shared key authentication
AN11 - IPSec between a Windows 2000 / XP and a Digi Transport Router
AN12: Configuring GPRS with Backup to CSD (GSM Data Call)
AN14 - Configure a Dual SIM cellular router to automatically failover to a second SIM card and revert back to the original SIM after a specified amount of time.
AN18 - TransPort Security Lockdown
AN20 - Lock a Digi TransPort Wireless WAN Router
AN15 - Configure a Dual SIM cellular router to automatically failover to the second SIM card and remain on SIM 2 until a failure is detected, then revert to SIM 1.
AN17 - Command Line Response Manipulation
AN21 - Configure a TransPort to be an L2TP over IPSEC VPN server
AN23 - Configure Automatic Emails
AN22 - Configure an IPSEC VPN tunnel between two Digi Transport or Sarian Routers using Certificates and SCEP
AN24 - Making and receiving GSM Circuit-Switched Data Calls (CSD)
AN25 - Configure an IPSEC VPN Tunnel Between a Cisco and Sarian or Digi TransPort router Using Certificates and SCEP
AN26 - Configure a Sarian or Digi TransPort router as an L2TP over IPSEC Client
AN29 - Create an IPsec VPN between a Digi TransPort router and TheGreenBow VPN client
AN31 - Virtual Router Redundancy Protocol (VRRP) and VRRP+
AN28 - Configuring VLAN Tagging (802.1q)
AN27: Configure an IPSEC VPN between a Sarian or Digi Transport Router and Cisco PIX
AN32- Using SNAIP in RAW mode over IPSEC
AN34 - Configuring ADSL to failover to PSTN with automatic testing and recovery back to ADSL
AN21 - Configure a TransPort to be an L2TP over IPSEC VPN server
AN36 - IPSec between a TransPort router and a Cisco ASA 5505 using Cisco EasyVPN (XAUTH and MODECFG)
AN33 - Using Using TPAD in direct mode with ISDN
AN37 - GRE over IPSEC with a Cisco Router
AN35 - Configuring ADSL to failover to Cellular with automatic testing and recovery back to ADSL.
AN41 - Ethernet WAN Failover to Cellular/Mobile
AN42 - Dynamic VPN tunnels using Egroups and MySQL with fail-over to local database
AN48 - WPA Enterprise Wi-Fi Client to Digi TransPort
AN38 - IP Passthrough on a TransPort WR
AN40 - Configure Ethernet Bridging Between Local and Remote DIGI TransPort Networks
AN43: Using a TransPort router with DialServ in PPP mode
AN44 - Using a TransPort router with DialServ in Protocol Switch mode
AN46 - Configuring a TransPort WR as an OpenVPN server for Windows OpenVPN clients
AN47 - Configuring a Windows OpenVPN server and a TransPort WR as an OpenVPN client
AN54 - Configuring Dynamic Multipoint VPN (DMVPN) using GRE over IPSec between Cisco routers and Digi TransPort
AN58 - How to Configure an IKEv2 VPN Tunnel Between a TransPort router and a Cisco Responder
AN50 - Configure a TransPort router as a L2TP IPsec VPN server for Android and Apple iOS clients
AN59 - How to Configure IKEv2 Tunnel Between Two Digi Transports
AN51 - Verizon LTE Provisioning on Digi TransPort
AN61 - Configuring SMS alerting on a TransPort router
AN52 - Configuring Syslog alerting on a TransPort router
AN62 - Configuring SNMP Trap alerting on a TransPort router
AN53 - Configure Digi TransPort Router to use DMNR - Dynamic Mobile Network Routing
AN55: Connect Wi-Fi Clients with Hotspot feature on Digi TransPort
AN75 - How to configure two Digi Transport WR Routers as OVPN Client and Server
AN56 - Hotspot feature for Wi-Fi clients with RADIUS User Authentication on Digi TransPort
AN76 - How to configure an Ubuntu OpenVPN server and a Digi TransPort WR as an OpenVPN client
Application Guide : Upload a File via RCI
AN57 - Digi TransPort Simultaneous Wi-Fi Access Point and Client Mode Setup
AN67 - Using The Low Power Modes on Digi TransPort
AN73 - How to configure Automatic Failover between two IPsec tunnels on Digi Transport WR Routers
AN74 - How to configure a GRE over IPsec Tunnel between two Digi TransPort WR Routers
Technical Notes
QN01 - Configure a Sarian or Digi TransPort router to send an automatic email on a specific event
QN02 - Configure the wireless WAN (PPP) interface
QN02 - Configure the wireless WAN (PPP) interface
QN03 - Backup and restore configuration files
QN05 - Converting GRE configurations from the old to the new method
QN04 - TCP/UDP port re-direction through NAT using Static NAT Mappings or a firewall script
QN05 - Converting GRE configurations from the old to the new method
QN07 - Configure a PPTP tunnel to Windows 2003 Server running RRAS
QN07 - Configure a PPTP tunnel to Windows 2003 Server running RRAS
QN08 - OSPF Configuration
QN09 - Configuring the BGP File
QN10 - SSH access to a router with RSA public & private key authentication
QN11 - Configuring a Digi TransPort as a PPTP server for Windows Clients
QN12 - Configuring a Sarian or Digi TransPort wireless router to use 2 APN’s simultaneously
QN13 - Sarian or Digi TransPort to Netgear DG834G IPSec tunnel
QN14 - Secure File Upload Using PSCP
QN15 - Quality of Service (QoS) on a Sarian or Digi TransPort router
QN16 - Configuring HTTPS web server mode
QN17 - MIB file creation and basic usage with SNMP clients
QN18 - Configuring a Sarian or Digi TransPort router to accept CLI commands via SMS
QN19 - Using SSH tunnelling to securely manage a router with HTTP
QN20 - Configuring a GRE tunnel over an IPSec tunnel and using BGP to propagate routing information (GRE over IPSec with BGP)
QN21 - Determining the HSDPA/HSUPA wireless module type in a Sarian or Digi TransPort branded router
QN22 - Configuring Wireless LAN security and DHCP on the DR6410 mk.II
QN23 - Configuring Wi-Fi client mode on a TransPort router.
QN24 - Extracting the debug.txt file from a Digi TransPort or Sarian router
QN25 - CDMA Provisioning on a Digi TransPort Router
QN26 - Using the firewall of a Digi TransPort to redirect HTTP Traffic to a proxy server
QN30 - Reboot a TransPort router at a specific time every day
QN31 - Using an External Modem with a Digi TransPort Router
QN32 - Using Digi RealPort with a Digi TransPort Router
QN33 - Modifying the Mac Address on a Digi TransPort Router
QN34 - Configuring Syslog alerting on a TransPort router
QN35 - Configuring SMS Alerts on a TransPort Router
QN36 - Configuring SNMP Traps on a TransPort Router
QN37 - Configuring a TransPort Serial Port for TCP Sockets
QN38 - Upgrade Software Options and/or VPN Licenses on a Digi TransPort Router
QN39 - Carrier Switching with Sierra Wireless MC7354
QN45 - How to setup the Analyzer to get the IKE/IPsec trace from a Digi TransPort WR
QN46 - Temperature Monitoring on Digi TransPort Routers
QN40 - Create an OpenSSL Tunnel with certificates on a Digi TransPort Router
QN51 - Common Passwords/ID errors in IPsec VPN negotiation for TransPort WR routers
QN41 - Create a VPN Tunnel between 2 Digi TransPort using OpenSSL certificates
QN44 - Data Usage - Digi Remote Manager
QN52 - Connecting to Digi Remote Manager Through Web Proxy
QN43 - Telit firmware update on Digi TransPort
QN53 - Ethernet to W-WAN Failover with Logical Ethernet Interface
QN54 TransPort to Cisco VPN Tunnel using Certificates
QN47 - Multiple cellular modules configuration file using tags
QN55 - Configure a Digi TransPort Router with NAT to a Passive FTP Server
QN59 - Upload PPP stats to Remote Manager using Digi ESP
QN48 - Load Firmware and Configuration onto a TransPort WR router using a USB flash device
QN50 – Configure a TransPort as a WiFi AP
QN60 - Configure a TransPort Router as an Easy VPN Client to a Cisco Router running IOS 15.
QN49 - Load Firmware and Configuration onto a TransPort WR router including site specific settings using a USB flash device
QN61 - Main Mode IPsec IKEv1 VPN from TransPort to StrongSwan using Preshared key
QN62 - How to configure IKEv2 IPsec VPN from TransPort WR to StrongSwan using Certificates
QN63 - How To Configure IKEv2 IPsec VPN between TransPort WR routers using Open SSL Certificates
QN64 - How to Troubleshoot OpenVPN On TransPort WR Routers
QN65 – Configure an IPsec VPN tunnel between a TransPort WR and an Accelerated router
QN58 - Carrier Switching with MC7455
QN301 - Hardware Errata: GOBI 3G Carrier Conversion
QN56 – Using a USB GPS module to update Time and Position on a TransPort router
QN57 - TransPort Router to Serial Server with modem emulation for PSTN Line replacement
Security Bulletin: DNS Proxy Vulnerability on Internet Connected Routers/Gateways
Digi TransPort Family Serial Pin-outs
Certifications
Japan/Telec/EC Declaration of Conformity
Government Agency Certifications
ARCHIVES
Digi Remote Manager v2.2 User Guide

 

RSSProduct support RSS feed for Digi Transport WR41 Knowledge BaseSearch our knowledge base for articles related to this product

Expert Support

Upgrade to hands-on support from our team Learn More
Contact a Digi expert and get started today! Contact Us