Rabbit Products

MiniCore RCM6700
High performance embedded device servers

Rabbit® 6000 running up to 200 MHz
10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules
1 MB of internal RAM for program storage
Up to 4 MB of serial Flash for datalogging or web page storage
Flexible Interface Module (FIM) provides protocol support for CANbus or SD/SDIO
Device Cloud by Etherios platform provides cost-effective cloud computing for remote device management
Seamless migration to chip level design
5X greater throughput performance

MiniCore RCM5700
Ultra-compact serial to Ethernet module

10/100Base-T Ethernet
Up to 640 KB SRAM for data, 1 MB flash memory for program storage, 2 MB serial flash for mass storage
Up to 32 GPIO lines and 6 serial ports
Serial to Ethernet bridge
Embedded web server, remote firmware update, open source code and royalty-free
Cost-competitive embedded solution
Quick time to market

SBC BL4S200
Single-board computer

Uses Rabbit® 4000 and Rabbit 5000 microprocessors
Choice of Wi-Fi, ZigBee or Ethernet connectivity
40 digital I/O and up to 5 serial ports
8 input and 2 output analog channels
Advanced I/O subsystem is software configurable reducing the load on the processor
I/O features include event/capture counting, quadrature decoders, PWMs and PPMs

OP7200 eDisplay
Ethernet-intelligent operator interface

Rabbit® 2000 microprocessor at 22 MHz
¼ VGA display (320 x 240 pixels)
10Base-T Ethernet, RJ-45
256K Flash/128K SRAM
24-27 industrialized I/O and 4 CMOS-compatible serial ports
English and foreign language fonts
Graphic and bitmap images
Open source GUI libraries

RabbitCore RCM4510W
ZigBee RF core module

Rabbit 4000 at 29.49 MHz
Designed for ZigBee connectivity
512K Flash, 512K data SRAM
Up to 40 general-purpose I/O line configurable
Web Server capability
Wireless mesh networking capability
Low power

RabbitCore RCM3900
Microprocessor core module

Rabbit® 3000 microprocessor at 44 MHz
Extended operating temperature range: -20° C to +80° C
10/100Base-T Ethernet
Up to 1 GB microSD hot-swappable storage
Lower-risk design of embedded systems applications
Software debugging directly on target hardware

RabbitCore RCM5400W
Microprocessor core module

Rabbit 5000 running at 74 MHz
Up to 2 MB of serial flash for data intensive applications utilizing FAT file system
39 digital I/O lines and up to 6 serial ports
Integrated IEEE 802.11b/g Wi-Fi
802.11i security compliance supporting WPA and WPA2 enterprise authentication
Wireless web server capability
Easy C-language program development and debugging
Low design risk – deploy with confidence into any Wi-Fi network, reduce development time by 50%

SBC BL4S100
Single-board computer

Rabbit 4000 running at 40 MHz
On-board Rabbit RIO® device for exceptional I/O functionality and flexibility
Web Server functionality
Easy implementation of mesh networking with known good hardware
Dynamic C® software environment to reduce development time

MiniCore RCM5600W
Ultra-compact Wi-Fi module

Rabbit® 5000 running at 74 MHz
On-board single-chip 802.11b/g transceiver
Up to 32 GPIO lines and 6 serial ports
1 MB of SRAM and up to 4 MB of serial flash
Update firmware wirelessly
Embedded web server

RabbitCore RCM3700
Microprocessor core module

Up to 4 serial ports for multiple device connectivity
10Base-T with optional 10/100Base-T Ethernet
Up to 512K Flash for code and up to 512K SRAM for data
1 MB of on-board serial Flash utilizing FAT file support for reliable data storage
Embedded web server capability for remote monitoring and control
Exceptionally fast performance for math, logic and I/O

RabbitCore RCM4300
Microprocessor core module

Rabbit 4000 running at 58.98 MHz
Supports up to 2 GB microSD memory card, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
10/100Base-T Ethernet, 36 GPIO, 6 serial ports
8 channel 12-bit resolution (RCM4300 only)
Embedded web server
Easily implement secure embedded devices with client side SSL or AES encryption
Included Remote Program Update allows for firmware updates from anywhere in the world

RabbitCore RCM3600
Microprocessor core module

Rabbit 3000 microprocessor at 22 MHz
Up to 512K Flash/512K SRAM
33 parallel digital I/O with configurable options
4 serial ports (IrDA, HDLC, async, SPI)
5VDC input, 3.3VDC interface
Compact footprint: 2.11” x 1.23” x 0.62” (54 mm x 31 mm x 16 mm)
Ready-made platform for fast time-to-market – save up to 3 months of design integration time
Low-cost embedded microprocessor module

SBC BL2600
Ethernet-enabled single-board computer

Rabbit® 3000 microprocessor at 44 MHz
10/100Base-T Ethernet, RJ-45
512K Flash/512K SRAM
36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs
RabbitNet expansion ready
Multiple “core module” options allow flexibility in functionality

RabbitCore RCM4200
Microprocessor core module

Rabbit 4000 running at 59 MHz
10/100Base-T Ethernet, RJ-45 jack
512K Flash / 512K Data SRAM
4 MB or 8 MB Serial Flash for data storage
Up to 35 GPIO, up to 5 serial ports
8 channels 12-bit A/D converter option
Embedded device networking, intelligence, I/O control and web server capability
Abilty to remotely update firmware

SBC BL2100
Single-board computer

40 sinking/sourcing digital I/O
Up to 512K Flash for program and up to 512K SRAM for data
16 digital outputs which can sink/source 200 mA
11 A/D and 4 D/A with 12-bit resolution
Up to 4 serial ports: two 3-wire (or one 5-wire) RS-232 and 1 RS-485
Royalty-free TCP/IP stack

RabbitCore RCM3400
Microprocessor core module

Rabbit 3000 microprocessor at 30 MHz
Up to 512K Flash/512K SRAM
8 channel 12-bit A/D with programmable gain
47 digital I/O ports
5 serial ports (IrDA, HDLC, asynch, SPI)
MAC ID installed
Compact size simplifies integration
Ready-made platform for fast time-to-market, up to 3 months of design integration time savings
Low-cost embedded microprocessor module

RabbitCore RCM4100
Microprocessor core module

Rabbit 4000 running up to 59 MHz
512K Flash, 256K / 512K Data SRAM
Up to 40 GPIO, up to 6 CMOS-compatible serial ports
Auxiliary I/O feature for reducing processor bus loading
8 channels 12-bit A/D converter(RCM4100)
Ideal for device intelligence and control
Well suited for easy integration with peripheral technologies such as GPS, cellular modems, RFID readers, sensors, etc.

RabbitCore RCM3309
Microprocessor core module

Rabbit® 3000 microprocessor at 44 MHz
10/100Base-T Ethernet, RJ-45
512K Flash/512K SRAM/512K Program Execution SRAM
4 MB or 8 MB serial Flash
49 digital I/O and 5 serial ports
Plenty of storage with safe and secure firmware and data transfers
Debug software directly on target hardware

SBC LP3500
Single-board computer

Low power consumption less than 100 uA in power save mode
8 A/D inputs with 12 bit resolution
Digital outputs can sink up to 200 mA
6 serial ports for multiple device connectivity
16 protected digital inputs
1 relay output up to 1A
Backup battery for data protection
Data logger

RabbitCore RCM4000
Communications and control processor

Rabbit 4000 running at 59 MHz
Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, 32 MB of Flash memory
10Base-T Ethernet (RJ-45 connector), up to 28 GPIO, up to 5 serial ports
8 channels 12-bit A/D converter
Web server capability and remote device control
Low-cost and easily deployable platform for non-critical embedded security
Security-key feature with “tamper detect” and encryption capabilities

RabbitCore RCM3209
Microprocessor core module

Rabbit 3000 microprocessor at 44 MHz
Optional 10/100Base-T Ethernet
512K Flash / 256K SRAM / 512K Program Execution SRAM
52 digital I/O and 6 serial ports for multiple device connecvity options
Software debugging directly on target hardware

RabbitCore RCM3100
Microprocessor core module

Rabbit 3000 microprocessor at 30 MHz
Up to 512K Flash/512K SRAM
54 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
3.3V operation, low power “sleepy” modes (< 2mA)
Compact size simplifies integration
Ready-made platform for fast time-to-market, up to 3 months of design integration time savings
Low-cost embedded microprocessor module
Easily links to multiple serial devices

RabbitCore RCM3000
Microprocessor core module

Rabbit 3000 microprocessor at 30 MHz
Up to 512K Flash/512K SRAM
52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
3.3V operation, low power “sleepy” modes (< 2mA)
Small form factor
Royalty-free TCP/IP stack in source code
Low-cost embedded microprocessor module
Security software add-on modules available

Narrow Results

Wireless Interfaces

Wired Interfaces

Ethernet

Software

Display/Video

Search Within