Add devices to XCTU
These instructions show you how to add two devices to XCTU. However, you can use these instructions to add any number of devices.
- Connect two XBee 868LP RF Modules to your computer using the USB cables.
Tip Connect the two shorter range XBee modules instead of the longer range XBee-PRO modules. This will make it easier to set up a mesh network. See Connect the hardware.
- Launch XCTU .
- Click the Configuration working modes button .
- Click the Discover radio modules button .
- In the Discover radio devices dialog, select the serial ports where you want to look for devices and click Next.
- In the Set port parameters window, maintain the default values and click Finish.
As XCTU locates devices, they appear in the Discovering radio modules dialog box.
- Click Add selected devices once the discovery process has finished.
You should see something like this in the Radio Modules section: