IP (IP Protocol)

This command applies to the XBee 3 Cellular LTE-M/NB-IoT.

Note For NB-IoT, TCP and SMS support is dependent on the network. Contact your network provider for details.

Sets or displays the IP protocol used for client and server socket connections in IP socket mode.

For TLS, the ublox SARA-R4 series AT Commands Manual provides the list of supported cipher suites under the SSL/TLS security layer profile manager +USECPRF heading.

Parameter range

0 - 4

Value	Description
0x00	UDP
0x01	TCP
0x02	SMS (Transparent mode)
0x03	Reserved
0x04	TLS over TCP

Default

0x01