SD (Shutdown)

This command applies to the XBee 3 Cellular LTE-M/NB-IoT.

Shuts down the device. When the shut down process is complete, the device returns OK. After the device responds OK, you can safely remove power from the device.

If the radio can't be fully shut down within two minutes, the device returns ERROR.

You can verify the state of the device using the AI command. After you issue the SD command and a response has been returned (either OK or ERROR), issue the AI command. If the shutdown was successful, 2D is returned.

Parameter range

Parameter	Description
0	Shuts down the device. When the shut down process is complete, the device returns OK.
1	Reboots the module when the shut down completes.

Default

N/A