ConnectCore Products

15 results
Digi ConnectCore 8X SBC Pro
Intelligent and connected single board computer based on the NXP i.MX 8X; with scalable dual/quad-core performance for industrial IoT applications
  • Industrial i.MX 8X quad/dual-core SOM and SBC platform family
  • Compact Pico-ITX form factor (100 mm x 72 mm)
  • Power management with both hardware and software support for low-power designs
  • Multi-display and camera capabilities with hardware acceleration
  • Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
  • Seamless cellular modem and Digi XBee® 3 integration
  • Built-in Digi TrustFence® device security
  • Yocto Project® Linux® and Android™ support
Digi ConnectCore Cloud Services
Integrated edge-to-cloud connectivity
  • Industry-leading cloud and edge tools for rapid device deployment, and easier asset management
  • Automate mass firmware and software updates to enhance functionality, stay in compliance and scale your deployment
  • Access data from edge devices that were previously out of reach
  • Integrate device data through open APIs to gain deeper insights and control with third-party applications
  • Monitor network, device and asset performance and security with bi-directional communications
  • Receive real-time alerts and detailed reports on network health and device conditions
Digi ConnectCore 6+ SBC
NXP i.MX6Plus based surface-mount module solution with scalable, quad-core performance and integrated wireless connectivity
  • Compact off-the-shelf SBC
  • Scalable capabilities and i.MX6Plus performance
  • Gigabit Ethernet and pre-certified dual-band 802.11ac + Bluetooth® 5
  • Seamless cellular modem and Digi XBee® integration
  • Complete set of available peripherals and interfaces with customization options
  • Designed for flexibility and reliability
  • Yocto Linux and Android software platform support
  • Industrial operating temperature available
Digi ConnectCore 8X SOM based on NXP i.MX 8X
Intelligent and connected embedded system-on-module based on the NXP i.MX 8X, with scalable dual/quad-core performance for industrial IoT applications
  • Industrial i.MX 8X quad/dual-core SOM and SBC platform family
  • Digi SMTplus® form factor (40 mm x 45 mm) for ultimate reliability and design freedom
  • Power management with both hardware and software support for low-power designs
  • Multi-display and camera capabilities with hardware acceleration
  • Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
  • Seamless cellular modem and Digi XBee® 3 integration
  • Cloud and edge-compute services integration
  • Built-in device security with Digi TrustFence®
  • Remote management with Digi ConnectCore® Cloud Services
  • Digi Embedded Yocto  Linux® and Android support
Digi ConnectCore 6UL SBC Pro
Powerful, secure, pre-certified connected Single Board Computer in standard form factor with complete design flexibility.
  • Powerful and flexible off-the-shelf solution in Pico-ITX form factor
  • Production-ready with minimal hardware design effort
  • Rugged design with industrial operating temperature range
  • Pre-certified dual-band 802.11ac Wi-Fi connectivity
  • Bluetooth® 5, with Bluetooth Low Energy support
  • Out-of-box support for cellular connectivity
  • On-board NFC Forum Type 2 compliant tag
  • Dual 10/100 Mbit Ethernet networking
  • Integrated display and camera capabilities
  • Rich interface and peripheral support
  • Complete Yocto Project® Linux® BSP with source code
  • Digi TrustFence® device security framework
Digi ConnectCore 6+
NXP i.MX6Plus based surface-mount module solution with scalable, quad-core performance and integrated wireless
  • Scalable Cortex-A9 multi-core performance
  • Cost-effective, reliable, low-profile surface-mount module form factor
  • Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5
  • Smart Power Management Architecture with PMIC
  • Yocto Project Linux software platform support
  • Reliable design with IEC 60068 and HALT verification
  • Dedicated on-module security + authentication controller
  • Designed for long-term availability
Digi ConnectCore 6UL
Intelligent and connected embedded system-on-module based on the NXP i.MX6 UL, with turnkey Linux software support in a stamp-sized form factor
  • Stamp-sized, secure, connected System-on-Module platform
  • NXP i.MX6UL, Cortex-A7 at 528 MHz
  • 256 MB / 512 MB / 1 GB NAND flash, 256 MB / 512 MB / 1 GB DDR3
  • Patent-pending low-profile Digi SMTplus™ form factor
  • Integrated Digi Microcontroller Assist™ for 2.5 µA ultra-low power modes
  • Pre-certified 802.11a/b/g/n/ac + Bluetooth® 5 option
  • Integrated dual 10/100 Ethernet connectivity
  • Digi TrustFence® embedded device security framework
  • Royalty-free embedded Linux® software platform
  • Turnkey development available from Digi WDS
Digi ConnectCore 6 / 6N
NXP i.MX6 based surface-mount module solution with scalable, single-/multi-core performance and integrated wireless
  • Scalable Cortex®-A9 multi-core performance
  • Cost-effective, reliable, low-profile surface-mount module form factor
  • Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5.0
  • Smart Power Management Architecture with PMIC
  • Android™, Yocto Project Linux® and Windows® Embedded Compact software platform support
  • Reliable design with IEC 60068 and HALT verification
  • Designed for long-term availability
Digi ConnectCore 6N SBC
Reliable and compact NXP i.MX6 SBC family with integrated Ethernet, Wi-Fi, Bluetooth, Digi XBee and cellular connectivity options
  • Compact off-the-shelf SBC family
  • Scalable capabilities and i.MX6Quad/Dual performance
  • Gigabit Ethernet and pre-certified dual-band Wi-Fi 5 and Bluetooth® 5.0
  • Ready for cellular connectivity and Digi XBee® RF
  • Complete set of available peripherals and interfaces with customizable options
  • Designed for flexibility and reliability
  • Windows® Embedded Compact, Yocto Project® Linux® and Android™ software platform support
  • Industrial operating temperature available
Digi ConnectCore® 9P 9215
Highly Integrated, Network-Enabled Core Module
  • Compact, cost-efficient 150 MHz ARM9 module
  • Secure high-performance Ethernet networking
  • Common family footprint for wired and wireless modules
  • Programmable on-chip interfaces, dynamic power management
Digi ConnectCore® i.MX53 / Wi-i.MX53
NXP/Freescale i.MX53 Cortex A8 SoM
  • High-performance 32-bit System-on-Module
  • Long-term product availability solution
  • Single and dual 10/100 Mbit Ethernet networking
  • Pre-certified 802.11a/b/g/n Wi-Fi interface
  • High-performance 2D/3D Graphics Processing Unit
  • Hardware video processing with 1080p decoding
  • Low-emission design with FCC Class B compliance
  • Zigbee, cellular and satellite connectivity options
  • Industrial operating temperature support
  • Support for Embedded Linux®, Microsoft Windows® Compact 7, Android™, and Yocto Project® Linux
Digi ConnectCore® i.MX51 / Wi-i.MX51
NXP/Freescale i.MX51 Cortex A8 SoM
  • Integrated secure wireless 802.11a/b/g/n Wi-Fi LAN
  • Powerful 2D/3D graphics and 720p video
  • Support for Embedded Linux, Microsoft Windows Compact 7, Windows CE 6.0, Android, and Yocto Project Linux
  • Industrial operating temperature
Digi ConnectCore 93
Embedded, wireless system-on-module based on the NXP i.MX 93 processor, with AI/ML NPU, designed for longevity and scalability in industrial IoT applications
  • Industrial i.MX 93 single/dual-core embedded SOM platform
  • AI/ML Arm® Ethos U65 micro neural processing unit (NPU)
  • Pre-certified dual-band 802.11ax Wi-Fi 6 and Bluetooth® 5.3
  • Digi SMTplus® form factor (40 mm x 45 mm) for ultimate reliability
  • Superior power management with hardware and software support
  • Seamless cellular modem and Digi XBee® integration
  • High level of pin-compatibility with Digi ConnectCore® 8 SOMs
  • Built-in Digi TrustFence® device security, identity and privacy
  • Remote management with Digi ConnectCore® Cloud Services
  • Digi Embedded Yocto Linux® support
Digi ConnectCore MP1
Intelligent, wireless and secure embedded system-on-module based on the STM32MP1 MPU family, with turnkey Linux support in the robust Digi SMTplus standard form factor
  • Industrial-grade, scalable, embedded SOM platform
  • STMicroelectronics STM32MP13 and STM32MP15
  • Pre-certified dual-band Wi-Fi 5 (802.11ac) and Bluetooth® 5.2
  • Power management with hardware and software support
  • Digi SMTplus® form factor (29 x 29 mm) for ultimate reliability
  • High level of pin-compatibility with Digi ConnectCore 6UL SOMs
  • Built-in Digi TrustFence® device security, identity and privacy
  • Seamless cellular modem and Digi XBee® integration
  • Digi ConnectCore Cloud Services remote monitoring, device management and IoT application enablement
  • Digi Embedded Yocto Linux support
  • Turnkey development services available from Digi WDS
Digi ConnectCore 8M Mini
Embedded system-on-module based on the NXP i.MX 8M Mini processor with built-in Video Processing Unit (VPU); designed for longevity and scalability in industrial IoT applications.
  • Industrial i.MX 8M Mini quad-core system-on-module
  • Digi SMTplus® form factor (40 mm x 45 mm) for ultimate reliability and design freedom
  • Power management with both hardware and software support for low-power designs
  • Display and camera capabilities with graphics and video hardware acceleration
  • Video capabilities with built-in VPU
  • Pre-certified dual-band 802.11a/b/g/n/ac and Bluetooth® 5 connectivity
  • Seamless cellular modem and Digi XBee® wireless integration
  • Cloud and edge-compute services integration
  • Built-in device security, identity and privacy with Digi TrustFence® and a hardware Secure Element
  • Remote management with Digi ConnectCore® Cloud Services
  • Digi Embedded Yocto  Linux® and Android support