AnywhereUSB 24 Plus components

Verify that you have the following included and required additional equipment. A list of optional equipment is also included below.

Note The power supply for the AnywhereUSB 24 Plus is built into the device.

Included equipment

Equipment Description
AnywhereUSB 24-port device

For more information, see:
Loose label sticker

A loose label sticker that includes the unique device password is included in the box. This default password will be needed if the device is factory reset and you want to access the web UI on the device.

Retain this label sticker with your hardware records.

See QR code definition for information about the information contained in the QR code.

Required additional equipment

Equipment Description
Ethernet cable

STP Cat 7 Ethernet cable

See Step 5: Connect to the Hub using an Ethernet LAN connection.
Power cord

IEC power cord

See Step 4: Connect the power supply.

Optional additional equipment

Equipment Description
Additional Ethernet cable STP Cat 7 Ethernet cable
Additional power cord

IEC power cord

See Step 4: Connect the power supply.

 

Digi recommends using two power cords:

  • Two power cords to provide the power supply needed for the Hub and the USB ports in use. Refer to the AnywhereUSB data sheet for power supply information.

  • Two power cords maintain redundancy if one power supply fails. You can view the power supply LEDs on the front of the Hub to verify that the power supplies are active.

  • Using two cords maximizes heat dissipation.

  • Digi also recommends that you plug each power cord into separate main power circuits.
SFP+ modules

Connect an SFP transceiver module for fiber connection, such as Finisar Network FTLX8574D3BCL SFP+.

Note Digi recommends that you use either the Ethernet cable or the SFP+ module. If both the Ethernet cable and the SFP+ module are connected, data is sent and received by SFP+ only. Ethernet is not used to send or receive data.
Console cable

RS232 DB9 Console cable

Use the console cable to establish a serial connection from the console port on your device to your local laptop or PC. See Console port.
Regional power cable

For information about regional power cable requirements, see Additional power and cabling requirements: AnywhereUSB Plus 8 and 24.

Optional additional equipment for connecting to a cellular network

This equipment is required only if you want to connect to a cellular network. See OPTIONAL: Use the CORE module to connect to the cellular network (AnywhereUSB 8 and 24 port devices ONLY).

Equipment Description
Digi CORE® module
SIM card

An activated SIM card provided by your cellular network operator. You can insert up to two SIM cards in the CORE module.

The CORE module supports the standard mini-SIM cards (2FF).

Antennas (2)