Device tree file types

The device tree is a set of text files in the Linux kernel source tree that describe the hardware of a certain platform. They are located at arch/arm/boot/dts/ and can have two extensions:

  • .dtsi files are device tree source include files. They describe hardware that is common to several platforms which include these files on their .dts files.

  • .dts files are device tree source files. They describe one specific platform.

ConnectCore 6 Plus system-on-module

The ConnectCore 6 Plus is a system-on-module (SOM) solution that integrates:

  • NXP i.MX6QP system-on-chip featuring many interfaces such as UART, CAN, SPI, and I2C

  • DDR3 memory

  • eMMC memory

  • PMIC chip

  • Crypto-authentication chip

  • Optional Wi-Fi + Bluetooth chip

  • Optional Kinetis chip

The ConnectCore 6 Plus system-on-module needs to be soldered to a carrier board. For this reason, there is not a single .dts file for it. Instead, its hardware features are collected into .dtsi files that can be included by a final platform .dts.

Since the ConnectCore 6 Plus system-on-module is offered in different variants, multiple .dtsi files have been defined to describe the hardware inside:

File Description


Common hardware for ConnectCore 6 Plus system-on-module variants with QuadPlus/DualPlus CPU


ConnectCore 6 Plus system-on-module variant with QuadPlus/DualPlus CPU, wireless, and Bluetooth

Depending on your ConnectCore 6 Plus variant, your final platform .dts file will need to include one of these files.

ConnectCore 6 Plus SBC

The ConnectCore 6 Plus SBC is a carrier board assembling the ConnectCore 6 Plus system-on-module. The SBC assembles additional hardware like HDMI, Ethernet PHY, audio chip, PCIe minicard, microSD card holder, user LEDs, and so on.

As a final platform, the SBC has a .dts file that includes one of the ConnectCore 6 Plus system-on-module .dtsi files.

Include files

The SBC can assemble different variants of the ConnectCore 6 Plus system-on-module, so the common hardware of the SBC is described in a .dtsi file:

File Description


Common hardware for ConnectCore 6 Plus SBC

Final platform files

The final platforms are described in board-specific .dts files:

File Digi product smart part number CPU family Wireless Bluetooth




Graphical representation

The following graphic illustrates the composition of a .dts file.

ConnectCore 6 Plus device tree files

Device tree selection during boot process

Digi Embedded Yocto builds the different device tree files (.dts) for different boards and SOM variants into binary device tree blobs (.dtb). The device tree blobs are placed inside the linux partition along with the kernel binary.

The bootloader uses the board_id variable to determine which device tree blob to use when booting the system. See Carrier board version and ID.

To learn how to create a device tree for your custom carrier board and using a custom board ID, see Add a new custom machine.