Home  >  Products   >  Embedded Wireless and Wired Solutions   >  RF Modules   >  XBee RF Modules   >  XBee Proprietary RF Modules   >  XBee-PRO 900

XBee-PRO® 900

Long-range RF connectivity using multipoint protocol

Device Cloud by Etherios
  • Not recommended for new designs. For new designs see XBee-PRO 900HP
  • Common XBee footprint for a variety of RF modules
  • Outdoor RF line-of-sight range up to 6 miles (10 km)
  • Fast 156 Kbps RF data rate
  • Supports sleep modes for increased battery life
  • Product datasheet

XBee-PRO 900 embedded RF modules provide extended-range wireless connectivity to end-point devices. Supporting RF line-of-sight distances of up to 6 miles (with high gain antennas), these modules are ideal for extended-range wireless applications requiring low latency and increased data throughput.

As a member of the XBee® family of RF products, these modules are easy-to-use, share a common hardware footprint and are fully interoperable with other XBee products utilizing the same technology. XBee products are part of Digi's unsurpassed range of Drop-in Networking solutions, offering users seamless wireless communication between devices. XBee adapters provide wireless connectivity to electronic devices in wired networks. XBee XTenders provide long-range backhaul and data conversion between 2.4 GHz and 900MHz. ConnectPort® X gateways enable users to access and configure remote devices in a network.

Read more
XBee-PRO 900 hardware note: The XBee-PRO 900 shares hardware with XBee-PRO DigiMesh™ 900. As a result, modules can be “converted” from one platform to another by loading different firmware onto a given module. Contact Digi Support for details.
XBee-PRO 900 Embedded RF Modules North America: International:  
XBee-PRO 900 extended range module w/ wire antenna
View details 
XBP09-DPWIT-156
Not Applicable

Contact Us
XBee-PRO 900 extended range module w/ RPSMA connector
View details 
XBP09-DPSIT-156
Not Applicable

Contact Us
XBee-PRO 900 extended range module w/ U.FL connector
View details 
XBP09-DPUIT-156
Not Applicable

Contact Us
Platform XBee-PRO® 900
Performance
Power output 50 mW (+17 dBm)
Indoor/Urban Range Up to 450 ft (140 m)
Outdoor/RF Line-of-Sight Range Up to 1.8 miles (3 km), up to 6 miles (10 km) with high gain antennas
RF data rate 156 Kbps
Interface data rate Up to 230 Kbps software selectable
Operating frequency 900 MHz
Receiver Sensitivity (1% PER) -100 dBm
Networking
Spread Spectrum type FHSS (Frequency Hopping Spread Spectrum)
Supported network topologies Peer-to-Peer Mesh, point-to-point & point-to-multipoint
Error handling Retries & acknowledgements
Filtration options PAN ID, Channel, and 64-bit addresses
Channel capacity 8 hopping patterns on 12 channels
Addressing PAN ID, Channel, and 64-bit addresses
Power
Supply voltage XBee-PRO: 3.0 - 3.6 VDC
XBee footprint recommendation: 3.0 - 3.4 VDC
Transmit current 210 mA @ 3.3 V
Receive current 80 mA @ 3.3V
Power-down sleep current 60 uA @ 3.3V
General frequency band 902 - 928 MHz
Serial data interface 3V CMOS UART
Physical Properties
Size 0.960 in x 1.297 in (2.438 cm x 3.294 cm)
Weight 0.10 oz (3g)
Operating temperature -40° C to +85° C (industrial)
Antenna options U.FL, Reverse Polarity SMA (RPSMA), or wired whip antenna
Certifications
FCC (USA) Yes
IC (Canada) Yes
RoHS Compliant
Your M2M Expert®for Businessfor Developers
Contact Us
Phone
Email
Chat
Feedback
Newsletter SignupYouTubeGoogle+FacebookCopyright © 1996-2014 Digi International Inc. All rights reserved. Legal