The U-Boot environment is a block of memory in persistent storage. It is used to store variables in the form name=value.

Where is the U-Boot environment?

The ConnectCore 6 reads the U-Boot environment (including the MAC addresses) from the boot media, which means:

• If the device boots from the eMMC, it reads the environment from the eMMC.

• If the device boots from microSD card, it reads the environment from the microSD card.

• If it does not find a valid environment on the boot media, it uses a hard-coded default environment.

When the ConnectCore 6 boots from the eMMC, it reads U-Boot from eMMC boot partition 1 (device /dev/mmcblk0boot0 in Linux) and reads the U-Boot environment (including the MAC addresses) from eMMC boot partition 2 (device /dev/mmcblk0boot1 in Linux).

• The environment is located at the offset determined by constant CONFIG_ENV_OFFSET in U-Boot source code. at include/configs/ccimx6_common.h.

• The size of the environment is determined by constant CONFIG_ENV_SIZE in U-Boot source code. at include/configs/digi_common.h.

• There is a back-up copy of the environment in the same partition (where the original copy is) at the offset determined by constant CONFIG_ENV_OFFSET_REDUND in U-Boot source code. at include/configs/ccimx6_common.h.

Access U-Boot environment from Linux

You can access the U-Boot environment from a Linux application. In the U-Boot source tree, you can find the environment tools in the directory tools/env, which you can build with the following command:

$make env Digi Embedded Yocto also compiles this tool by default and installs it on your target’s root file system as two executable files: • fw_printenv: to print the value of variables. • fw_setenv: to set the value of variables. The tools work with the configuration file /etc/fw_env.config, which must contain one or two entries in the form: Device name, offset, size. The first entry must point to the U-Boot environment location. The second (if present) must point to its redundant copy. For example: /etc/fw_env.config # Configuration file for fw_(printenv/setenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Device name Offset Size /dev/mmcblk0boot1 0x1C0000 0x4000 /dev/mmcblk0boot1 0x1E0000 0x4000 Append boot arguments to the kernel command line You can use the extra_bootargs variables to append commands to the default kernel command line. Important U-Boot environment variables on the ConnectCore 6 The following U-Boot environment variables are worth mentioning: MAC addresses Variable Description Flags$ethaddr

MAC address of the first wired Ethernet interface

change-default

$eth1addr MAC address of the second wired Ethernet interface if there is one change-default$wlanaddr

MAC address of the Wi-Fi interface

change-default

$btaddr MAC address of the Bluetooth interface change-default  About flags Variables with the write-once flag are protected and will not be overwritten by setenv or env default commands (unless manually forced with -f option). Variables with the change-default flag can only be written once using setenv command (unless manually forced with -f option). Digi programs the MAC addresses of the ConnectCore 6 during manufacturing and saves them in the U-Boot environment on the eMMC. If the device boots from an external media different from the eMMC (for example microSD card), the system reads the U-Boot environment from it, so MAC addresses will not match the ones assigned by Digi during manufacturing. You must program the MAC addresses of the available interfaces and save the environment on your boot storage media. You can find the Digi-assigned MAC address on the ConnectCore 6 module label. See Determine Digi MAC addresses for more information. MMC boot device Variable Description Flags$mmcbootdev

MMC device index where U-Boot booted from

write-once

During start-up, U-Boot initially sets this variable to the MMC device index where the device booted from:

• 0 if booting from internal eMMC (USDHC4)

• 1 if booting from microSD card (USDHC2)

You can use this variable to determine which MMC device the ConnectCore 6 booted from.

MMC device (update target)

Variable Description Flags

$mmcdev MMC device index to update firmware to - The update command uses this variable to determine the MMC device index to write the firmware to: • 0 for the internal eMMC (USDHC4) • 1 for the microSD card (USDHC2) You can modify this variable as needed. Module variant Variable Description Flags$module_variant

Variant ID code for the System-On-Chip

write-once

During start-up, U-Boot automatically sets this variable to the ConnectCore 6 System-On-Chip variant ID number (a hexadecimal code programmed in the SOM one-time programmable bits).

Carrier board version and ID

Variable Description Flags

$board_version Version number of the carrier board write-once$board_id

ID number of the carrier board

write-once

During start-up, U-Boot automatically sets these variables to the carrier board’s version and ID numbers (decimal numbers programmed in the SOM one-time programmable bits). See Carrier board version and ID.

Digi assigns MAC addresses according to a sequential scheme. The order of assignment depends on the available interfaces, but the scheme always respects the order Ethernet 1, Ethernet 2, Wi-Fi, Bluetooth and skips non-available interfaces.

You can determine the MAC addresses for your device either by reading the Ethernet MAC off the label and using the scheme to calculate subsequent addresses, or by reading them from your device. To read the stock environment variables from the device using the printenv command executed at the U-Boot prompt:

To get First Ethernet MAC address: