Requirements

To install a Digi Embedded Yocto toolchain, you need a development machine with at least:

  • Linux 64-bit system (Ubuntu 20.04)

  • 4 CPU cores

  • 4 GB of RAM

  • Between 3 GB and 10 GB of free disk space, depending on platform

Before starting development for your ConnectCore platform, make sure your device is correctly connected, powered, and running. See Step 2 - Set up the hardware and Step 3 - Program the Yocto firmware.

Download and install the toolchain

If you already installed a toolchain with the Digi Application Development Environment, you do not need to download and install it again.

Digi Embedded Yocto provides a pre-compiled C/C++ toolchain that matches the default image artifact. You can use it to cross-compile applications to run on Digi embedded platforms, including graphical GTK or Qt6 applications.

To install new Digi Embedded Yocto toolchains in your system, follow these steps:

  1. Download the toolchain installer from the Digi support page. (You can also use your own pre-compiled toolchains.)

    $ wget https://ftp1.digi.com/support/digiembeddedyocto/4.0/r6/sdk/ccimx6qpsbc/xwayland/dey-glibc-x86_64-dey-image-qt-xwayland-cortexa9t2hf-neon-ccimx6qpsbc-toolchain-4.0-r6.sh
  2. Give execution permission to the installer and install the toolchain on your host PC.

    $ chmod +x dey-glibc-x86_64-dey-image-qt-xwayland-cortexa9t2hf-neon-ccimx6qpsbc-toolchain-4.0-r6.sh
    $ ./dey-glibc-x86_64-dey-image-qt-xwayland-cortexa9t2hf-neon-ccimx6qpsbc-toolchain-4.0-r6.sh