Follow these steps to set up your ConnectCore 6 Plus SBC hardware:

ConnectCore 6 Plus SBC connections
  1. Connect the serial adapter cable to the console port [CONS]. Then connect a serial cable from the adapter to the development computer.

  2. Connect the Ethernet cable (not included) to the Ethernet port.

  3. Connect the antenna to the UFL connector.

  4. Connect an HDMI cable (not included) to the HDMI connector and then to an HDMI-compatible display.

  5. Connect a USB mouse to the USB connector.

  6. Add the appropriate plug and connect the power supply.

  7. Ensure the BOOT micro-switches are both in the down position.