The Management page allows you to perform several management operations on your device:
To access the Management page, click Management on the left navigation bar.
|The application display is specific to the ConnectCore platform, so your screen may look different than the one shown here.
The Management page includes device reboot functionality.
To reboot your device:
Click REBOOT. A confirmation dialog is displayed.
Click Yes to confirm the operation. The device reboots.
The Firmware update section displays the current Digi Embedded Yocto, Kernel, and U-Boot versions running in the device to help you determine the new firmware to install.
This operation installs a software update
*.swu file that has already been saved to the device.
To create a software update
*.swu file, follow the instructions in Build a software update package.
To update your device:
Click Choose file. A file explorer window is displayed.
Select the update file to upload.
Click Update firmware. A confirmation dialog is displayed.
Click Yes to confirm the firmware update operation. The update process starts.