Industry: Industrial Products

• Industry-leading cloud and edge tools for rapid device deployment, and easier asset management
• Monitor IoT devices, asset performance and security with bi-directional communications
• Automate mass firmware and software updates to enhance functionality, stay in compliance and scale your deployment
• Access data from edge devices that were previously out of reach
• Integrate device data through open APIs to gain deeper insights and control with third-party applications
• Receive real-time alerts and detailed reports on network health and device conditions

• Industrial i.MX 8X quad/dual-core SOM and SBC platform family
• Compact Pico-ITX form factor (100 mm x 72 mm)
• Power management with both hardware and software support for low-power designs
• Multi-display and camera capabilities with hardware acceleration
• Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
• Seamless cellular modem and Digi XBee® 3 integration
• Built-in Digi TrustFence® device security
• Yocto Project® Linux® and Android™ support

• Compact off-the-shelf SBC
• Scalable capabilities and i.MX6Plus performance
• Gigabit Ethernet and pre-certified dual-band 802.11ac + Bluetooth® 5
• Seamless cellular modem and Digi XBee® integration
• Complete set of available peripherals and interfaces with customization options
• Designed for flexibility and reliability
• Yocto Linux and Android software platform support
• Industrial operating temperature available

• Compact and economical cellular routing platform with industrial feature set
• Redundant connectivity with dual SIMs and Digi SureLink®
• FirstNet Trusted™ models for first responder communications
• Global bands support and options for global distribution, deployment and management
• Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
• Digi Remote Manager® platform for easy setup, mass configuration and management
• Dual Ethernet ports and single serial (RS-232) port
• Digi WAN Bonding for WAN aggregation and immediate failover
• Migrating from a WR-series device? Get information and tools to setup your new IX-series router.

• Industrial i.MX 8X quad/dual-core SOM and SBC platform family
• Digi SMTplus® form factor (40 mm x 45 mm) for ultimate reliability and design freedom
• Power management with both hardware and software support for low-power designs
• Multi-display and camera capabilities with hardware acceleration
• Pre-certified dual-band 802.11a/b/g/n/ac 2x2 and Bluetooth® 5 connectivity
• Seamless cellular modem and Digi XBee® 3 integration
• Cloud and edge-compute services integration
• Built-in device security with Digi TrustFence®
• Remote management with Digi ConnectCore® Cloud Services
• Digi Embedded Yocto  Linux® and Android support

• Weatherproof enclosure with wide temperature range makes it ideal for use in all environments
• Configurable read and report intervals with threshold and delta alarms
• Multiple configurable I/O make it possible to connect to multiple sensor types
• Modbus protocol support
• External, configurable power outputs eliminate the need for sensor power supplies
• Global cellular coverage
• Digi Remote Manager® platform for easy management
• Digi Connect Sensor+ SkyCloud is now available

• Powerful and flexible off-the-shelf solution in Pico-ITX form factor
• Production-ready with minimal hardware design effort
• Rugged design with industrial operating temperature range
• Pre-certified dual-band 802.11ac Wi-Fi connectivity
• Bluetooth® 5, with Bluetooth Low Energy support
• Out-of-box support for cellular connectivity
• On-board NFC Forum Type 2 compliant tag
• Dual 10/100 Mbit Ethernet networking
• Integrated display and camera capabilities
• Rich interface and peripheral support
• Complete Yocto Project® Linux® BSP with source code
• Digi TrustFence® device security framework

• Scalable Cortex-A9 multi-core performance
• Cost-effective, reliable, low-profile surface-mount module form factor
• Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5
• Smart Power Management Architecture with PMIC
• Yocto Project Linux software platform support
• Reliable design with IEC 60068 and HALT verification
• Dedicated on-module security + authentication controller
• Designed for long-term availability

• Network-attached USB hubs easily connect USB peripheral devices to a PC from remote or virtual hosts
• Ideal for connecting USB devices over the network in virtualized environments such as VMware®
• AnywhereUSB 24 Plus is rack mountable with two power supplies and Ethernet connections for failover redundancy
• Access and monitor USB and serial devices over TCP/IP connection
• Supports multi-host connectivity for each USB port or group independently
• Supports Digi Remote Manager® cloud-based management platform to deploy, monitor, manage and maintain a suite of peripherals and devices

• Stamp-sized, secure, connected System-on-Module platform
• NXP i.MX6UL, Cortex-A7 at 528 MHz
• 256 MB / 512 MB / 1 GB NAND flash, 256 MB / 512 MB / 1 GB DDR3
• Patent-pending low-profile Digi SMTplus™ form factor
• Integrated Digi Microcontroller Assist™ for 2.5 µA ultra-low power modes
• Pre-certified 802.11a/b/g/n/ac + Bluetooth® 5 option
• Integrated dual 10/100 Ethernet connectivity
• Digi TrustFence® embedded device security framework
• Royalty-free embedded Linux® software platform
• Turnkey development available from Digi WDS

• LTE-certified Digi CORE® LTE plug-in modem
• Scalable cellular technology allows you to match speeds to applications and future proof your network
• Optimized connectivity to any Ethernet device
• Battery pack for site survey to identify optimal signal strength placement
• Multiple mounting options and accessories
• Serial port for remote, out-of-band management
• Securely deploy, monitor and control devices with Digi Remote Manager®
• Zero-touch provisioning and cloud management
• Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover

• One hardware platform for use on LTE-M/NB-IoT networks with multi-band support to integrate with many carriers
• FCC certified and carrier end-device certified
• Integrated MicroPython programmability for edge compute
• MQTT support for Microsoft Azure and Amazon AWS
• Low power consumption optimized for long battery life
• Enhanced with Digi TrustFence® security framework
• Manage and configure with Digi XCTU® and Digi Remote Manager®
• Digi XBee® Transparent and API modes simplify design
• CE/RED certified and network tested
• Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee Mobile app
• Modem includes SIM and ready to activate. Visit shop.digi.com to activate service.

• Scalable Cortex®-A9 multi-core performance
• Cost-effective, reliable, low-profile surface-mount module form factor
• Pre-certified 802.11a/b/g/n/ac and Bluetooth® 5.0
• Smart Power Management Architecture with PMIC
• Android™, Yocto Project Linux® and Windows® Embedded Compact software platform support
• Reliable design with IEC 60068 and HALT verification
• Designed for long-term availability

• 4G LTE certified Digi CORE 1002-CM plug-in modem
• LTE-Advanced, standard LTE, or LTE with EV-DO fallback
• Upgrade to meet changing cellular standards
• Ethernet WAN port for wireline network access
• Optional remote mounting kit for site survey and PoE installation
• Zero-touch provisioning and cloud management
• Onboard signal strength and network status indicators

• Simple, out-of-the-box RF communications, no configuration needed
• Point-to-multipoint network topology
• 2.4 GHz for worldwide deployment
• Common XBee footprint for a variety of RF modules
• Industry leading sleep current of sub 1uA
• Firmware upgrades via UART, SPI or over the air
• Migratable to DigiMesh and Zigbee PRO protocols and vice-versa
• Turnkey development available from Digi WDS

• No configuration needed for out-of-the-box RF communications
• Common Digi XBee footprint for a variety of RF modules
• Simple topology to deploy and grow
• 2.4 GHz for worldwide deployment
• Low-power Digi XBee or extended-range XBee-PRO (pin/over-the-air compatible)
• Multiple antenna options
• Outdoor RF line-of-sight range up to 2 miles (3.2 km)* with high-gain antennas
• DigiMesh® peer-to-peer mesh networking protocol

• RS-232/422/485 switch selectable serial ports
• 1, 2 or 4 serial ports
• Serial port expansion for manufacturing floor, gas pump, Industrial Automation
• RealPort® with encryption provides SSL-based protection
• SSHv2 for encrypted connections

• Compact off-the-shelf SBC family
• Scalable capabilities and i.MX6Quad/Dual performance
• Gigabit Ethernet and pre-certified dual-band Wi-Fi 5 and Bluetooth® 5.0
• Ready for cellular connectivity and Digi XBee® RF
• Complete set of available peripherals and interfaces with customizable options
• Designed for flexibility and reliability
• Windows® Embedded Compact, Yocto Project® Linux® and Android™ software platform support
• Industrial operating temperature available

• 4G LTE certified Digi CORE 1002-CM plug-in modem
• LTE-Advanced, standard LTE, or LTE with EV-DO fallback
• Easily upgrade to meet changing cellular standards
• Optional Wi-Fi
• Remote mounting kit for site survey and PoE installation
• Ethernet WAN port for wireline network access
• Zero-touch provisioning and cloud management
• Onboard USB 2.0 port

• iOS and Android compatible mobile app
• Enables wireless Digi XBee® configuration via Bluetooth from a mobile device
• Configure, commission, troubleshoot and update Digi XBee 3 and XBee RR modules wirelessly and securely on-site
• Connects to Digi XBee 3 and XBee RR modules via Bluetooth
• Learn more in the Configuration with the Digi XBee Mobile App tutorial

• 4G LTE certified Digi CORE 1002-CM plug-in modem
• LTE-Advanced, standard LTE, or LTE with EV-DO fallback
• Upgrade to meet changing cellular standards
• Ethernet WAN port for wireline network access
• Optional high-speed Wi-Fi
• Onboard USB 2.0 port
• Zero-touch provisioning and cloud management
• RS-232 serial port for out-of-band console management

• Rabbit® 6000 running up to 200 MHz
• 10/100 Ethernet and pin-compatible with MiniCore 802.11b/g wireless modules
• 1 MB of internal RAM for program storage
• Up to 4 MB of serial Flash for data logging or web page storage

• Wired 10/100 Ethernet network interface
• Industrial operating temperature
• RJ-45 form factor compatible with Digi Connect Wi-ME
• Support for Digi Embedded Linux and NET+OS

• Cost-effective design in compact form factor
• 32-bit ARM processor at up to 454 MHz
• Single/dual 10/100 Ethernet connectivity options
• Pre-certified 802.11a/b/g/n Wi-Fi + Bluetooth® 4.0
• Support for Yocto Project Linux, Digi Embedded Linux, and Android

• High-performance 32-bit System-on-Module
• Long-term product availability solution
• Single and dual 10/100 Mbit Ethernet networking
• Pre-certified 802.11a/b/g/n Wi-Fi interface
• High-performance 2D/3D Graphics Processing Unit
• Hardware video processing with 1080p decoding
• Low-emission design with FCC Class B compliance
• Zigbee, cellular and satellite connectivity options
• Industrial operating temperature support
• Support for Embedded Linux®, Microsoft Windows® Compact 7, Android™, and Yocto Project® Linux

• LTE certified embedded cellular modem
• LTE with EV-DO fallback
• Low cost connectivity to any Ethernet device
• Battery pack for site survey to identify optimal mounting location
• Remote mounting kit for quick and easy installation
• Automatic cellular carrier detection with Carrier Smart Select
• Zero-touch provisioning with cloud management
• Compact size (4.3 x 4.3 x 1 inches)

• Integrated 10/100 Mbit Ethernet interface
• Strong enterprise-grade network security
• Common family footprint for wired and wireless modules
• High-speed serial interface (UART)

• Integrated secure wireless 802.11a/b/g/n Wi-Fi LAN
• Powerful 2D/3D graphics and 720p video
• Support for Embedded Linux, Microsoft Windows Compact 7, Windows CE 6.0, Android, and Yocto Project Linux
• Industrial operating temperature

• Rabbit 3000 microprocessor at 30 MHz
• Up to 512K Flash/512K SRAM
• 52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
• 3.3V operation, low power “sleepy” modes (< 2mA)

• Rabbit 3000 microprocessor at 30 MHz
• Up to 512K Flash/512K SRAM
• 54 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)
• 3.3V operation, low power “sleepy” modes (< 2mA)

• Rabbit 3000 microprocessor at 44 MHz
• Optional 10/100Base-T Ethernet
• 512K Flash / 256K SRAM / 512K Program Execution SRAM
• 52 digital I/O and 6 serial ports for multiple connectivity options

• Rabbit 3000 microprocessor at 30 MHz
• Up to 512K Flash/512K SRAM
• 8 channel 12-bit A/D with programmable gain
• 47 digital I/O and 5 serial ports (IrDA, HDLC, asynch, SPI)

• Rabbit 3000 microprocessor at 22 MHz
• Up to 512K Flash/512K SRAM
• 33 parallel digital I/O with configurable options
• 4 serial ports (IrDA, HDLC, async, SPI)

• Up to 4 serial ports for multiple device connectivity
• 10Base-T with optional 10/100Base-T Ethernet
• Up to 512K Flash for code and up to 512K SRAM for data
• 1 MB of on-board serial Flash utilizing FAT file support

• Rabbit® 3000 microprocessor at 44 MHz
• Extended operating temperature range: -20° C to +80° C
• 10/100Base-T Ethernet
• Up to 1 GB microSD hot-swappable storage

• Rabbit 4000 running at 59 MHz
• Up to 1 MB (16-bit) Program Flash, 1 MB (16-bit) SRAM, and 32 MB of Flash memory
• 10Base-T Ethernet (RJ-45 connector)
• Up to 28 GPIO and up to 5 serial ports
• 8 channels 12-bit A/D converter

• Rabbit 4000 running up to 59 MHz
• 512K Flash, 256K / 512K Data SRAM
• Up to 40 GPIO, up to 6 CMOS-compatible serial ports
• Auxiliary I/O feature for reducing processor bus loading

• Rabbit 4000 running at 59 MHz
• 10/100Base-T Ethernet, RJ-45 jack
• 512K Flash / 512K Data SRAM
• 4 MB or 8 MB Serial Flash for data storage

• Rabbit 4000 running at 58.98 MHz
• Supports microSD and microSDHC memory cards, 1 MB SRAM for shared code, 512K of battery-backed SRAM, FAT file organization
• 10/100Base-T Ethernet, 36 GPIO, 6 serial ports
• 8 channel 12-bit resolution (RCM4300 only)
• Embedded web server

• Patented RealPort® for COM/TTY port control and management
• TCP/UDP Socket Services for broad device connectivity and application use
• Auto-connect the serial device to networked server using raw, Telnet, rlogin
• Reverse Telnet for easy access of serial devices from network
• Switch selectable RS-232/422/485 for simple interfacing to any type of serial device
• Modem emulation allows support for devices designed only for modem communications

• Low-power CE/RED certified 868 MHz RF module based on Silabs EFM32 and ADI7023
• Design includes SAW filter for optimal performance in noisy RF environments
• OTA and pin compatible with legacy Digi XBee® 868LP
• Listen-Before-Talk and Frequency Agility for optimal interference immunity
• DigiMesh® networking topology for redundancy and reliability
• Simple configuration using XCTU® accelerates time to market

• Industrial serial server and protocol bridge
• Hardened 1-port device server for hazardous locations
• Multi-master/multi-protocol support
• Conformal coated circuit board
• Device server with 1 DB-9 serial port plus pass-through port

• Family includes powerful 1-Watt 900 MHz Digi XBee-PRO SX 900 and battery-optimized 20 mW Digi XBee SX 900 modules for mission-critical OEM designs
• DigiMesh networking topology for redundancy and reliability
• Design includes SAW filter for optimal performance in noisy RF environments
• 256-bit AES encryption for secure data communications
• Digi XBee SMT form factor saves valuable PCB space
• Fully certified for use in unlicensed 900 MHz band

• Superior LOS range of up to 28 miles* with high-gain antenna
• Simplified AT command set and advanced XBee API 
• Over-the-air firmware updates
• Software-selectable channel mask for interference immunity
• Advanced sleep modes: sleeping routers, pin sleep, cyclic sleep
• Try these modules out with a XBee-PRO 900HP DigiMesh Kit

• Global HSPA+ and 4G LTE support and certification on major carrier networks around the world
• Ethernet, serial I/O and Modbus bridging
• Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
• Dedicated GNSS Receiver supporting GPS, GLONASS, BeiDou, Galileo 
• License-free enterprise software: VPN, firewall, logging and authentication
• Digi Remote Manager® platform for easy setup, mass configuration and management
• Rugged enclosure, optimized for DIN rail or shelf mounting
• C1D2 and ATEX rated; NEMA TS2 temperature rated
• Migrating from a WR-series device? Get information and tools to setup your new IX-series router.

• WAN connectivity via LTE or 3G HSPA+ Networks
• Local wireless connectivity through Zigbee
• Local wired connectivity through RS-232/422/485, 2 analog inputs and 2 digital inputs
• Small commercial grade enclosure or NEMA 4X/IP66 case
• Full routing/IP filtering plus IPsec/SSL VPNs with DES, 3DES or AES encryption
• Easy development environment via DIA and Python scripting as part of Digi ESP IDE
• Support for Modbus/Modbus TCP
• Digi Remote Manager® support for easy setup, mass configuration and management

• Adjustable output power up to 1-Watt achieves up to 65 mile range*** with high gain antenna
• Interfaces options include RS-232, RS-485, USB, Analog I/O and Digital I/O
• DigiMesh® networking topology for redundancy and reliability
• 256-bit AES encryption for secure data communications
• Rugged metal enclosure and -40º C to 85º C operating temperature for industrial applications
• Fully certified for use in free, unlicensed 900 MHz band

• Digi XBee® (Zigbee®, DigiMesh®, 802.15.4), Bluetooth® 5.0 and RS-232/485 for connection to local devices
• Open source Python environment for custom application development
• LTE Cat 4 cellular and 10/100 Ethernet WAN connectivity
• Digi Remote Manager® platform for easy setup, mass configuration/firmware updates, remote device management and out-of-band management
• Full-featured industrial cellular routing platform
• Redundant connectivity with dual SIMs and Digi SureLink®
• Built-in Digi TrustFence® for device security, device identity and data privacy
• Migrating from a WR-series device? Get information and tools to setup your new IX-series router.

• Integrated MicroPython programmability enables custom scripting directly on the modem
• 2G and 3G fallback and GNSS for accurate location services
• Transparent and API modes simplify software design
• MQTT support for Microsoft Azure and Amazon AWS
• FCC certified and end-device certified with major carriers
• Direct USB provides easy PPP integration option
• OTA firmware updates
• Integrated with Digi TrustFence® security framework
• Easy to manage with Digi XBee Studio® and Digi Remote Manager®
• Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee® Mobile app
• Includes SIM, ready to activate and begin using

• 1, 2 or 4 software-selectable RS-232/422/485 serial ports to connect a wide variety of serial equipment over IP networks
• 10/100/1000 Ethernet (dual Ethernet on 2- and 4-port), with optional Wi-Fi, industrial temp, C1D2 rating and LTE
• Ideal for applications requiring COM ports, serial tunneling or TCP/UDP sockets
• Optimizes performance for the widest range of industry standard and device-specific protocols
• Built-in Digi TrustFence® for device security, secure encrypted connections, ongoing monitoring and support
• Easy setup and mass configuration with Digi Navigator™ and Digi Remote Manager®

New Digi Connect EZ 8 and 16/32 are also now available.

• Compact and economical connectivity solution with industrial feature set for public and private cellular networks
• Redundant connectivity with dual SIMs and Digi SureLink®
• Global and regional bands with single part number to simplify distribution, deployment and management
• Built-in Digi TrustFence® for device security, device identity and data privacy
• Digi Remote Manager® platform for easy setup, mass configuration and out-of-band management
• Ethernet port and single RJ-45 serial port (RS-232/485)
• Migrating from a WR-series device? Get information and tools to setup your new IX-series router.

• One hardware platform for use on LTE-M/NB-IoT networks with multi-band support to integrate with many carriers
• FCC certified and carrier end-device certified
• Integrated MicroPython programmability for edge compute
• MQTT support for Microsoft Azure and Amazon AWS
• Low power consumption optimized for long battery life
• Integrted with Digi TrustFence® security framework
• Easy to manage with Digi XBee Studio® and Digi Remote Manager®
• Digi XBee® Transparent and API modes simplify design
• CE/RED certified and network tested
• 2G fallback/GNSS
• Bluetooth® Low Energy for beaconing, connecting to Bluetooth sensors and local configuration using the Digi XBee® Mobile app
• Includes SIM*, ready to activate and begin using

• Global LTE and HSPA+ support and certification on major carrier networks around the world
• Ethernet, serial I/O and Modbus bridging
• Low-power feature can be easily configured for remote and off-grid applications
• Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots
• Dedicated GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo
• License-free enterprise software: VPN, firewall, logging and authentication
• Digi Remote Manager® platform for easy setup, mass configuration and management
• Rugged enclosure, optimized for DIN rail or shelf mounting
• C1D2 and ATEX rated; NEMA TS2 temperature rated
• Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover

• Integrated interfaces for analog, digital, hex and pulse information processing
• Modbus client and server configurations
• Built-in digital and analog input, digital output
• Networks connectivity over USB, Ethernet and serial interfaces
• On-board dashboard display with gauges, indicators and charts
• Self-provisioning devices report to SkyCloud for complete visibility of assets
• LTE coverage on all bands for North American carriers with 3G HSPA fallback
• Automatic carrier provisioning and dual-SIM failover support

• Uses Rabbit® 4000 and Rabbit 5000 microprocessors
• Choice of Wi-Fi or Ethernet connectivity
• 40 digital I/O and up to 5 serial ports
• 8 input and 2 output analog channels
• Advanced I/O subsystem is software configurable reducing the load on the processor

• Rabbit 4000 running at 40 MHz
• On-board Rabbit RIO® device for exceptional I/O functionality and flexibility
• Web Server functionality
• Easy implementation of mesh networking with known good hardware
• Dynamic C® software environment to reduce development time

• Low power consumption less than 100 uA in power save mode
• 8 A/D inputs with 12 bit resolution
• Digital outputs can sink up to 200 mA
• 6 serial ports for multiple device connectivity
• 16 protected digital inputs

• Industrial design with -40° C to 85° C operating temperature
• Superior outdoor LOS range of up to 28 Miles*
• RF data throughput up to 200 Kbps
• 900 MHz license-free ISM band operation
• Interface options include RS-232, RS-485, USB and Ethernet
• DigiMesh® peer-to-peer mesh networking protocol
  • Self-healing and discovery for network stability
• Includes mini-USB port for simnple device configuration

• Rabbit® 3000 microprocessor at 44 MHz
• 10/100Base-T Ethernet, RJ-45
• 512K Flash/512K SRAM
• 36 digital I/O (configurations include protected digital inputs, sinking/sourcing outputs, high current outputs)
• 12 analog channels: eight 11-bit A/D, four 12-bit D/A buffered outputs

• 40 sinking/sourcing digital I/O
• Up to 512K Flash for program and up to 512K SRAM for data
• 16 digital outputs which can sink/source 200 mA
• 11 A/D and 4 D/A with 12-bit resolution
• Up to 4 serial ports: two 3-wire (or one 5-wire) RS-232 and 1 RS-485

• Outdoor line-of-sight range up to 40 miles* (with high gain antenna)
• Outstanding receiver sensitivity (-110 dBm @9600 bps)

• Rabbit® 2000 microprocessor at 22 MHz
• ¼ VGA display (320 x 240 pixels)
• 10Base-T Ethernet, RJ-45
• 256K Flash/128K SRAM
• 24-27 industrialized I/O and 4 CMOS-compatible serial ports