Have a Question?

Digi® 6300-CX

Improve business continuity with Digi LTE cellular extenders

 
  • LTE certified embedded cellular modem
  • LTE with EV-DO fallback
  • Low cost connectivity to any Ethernet device
  • Battery pack for site survey to identify optimal mounting location
  • Remote mounting kit for quick and easy installation
  • Automatic cellular carrier detection with Carrier Smart Select
  • Zero-touch provisioning with cloud management
  • Compact size (4.3 x 4.3 x 1 inches)
How to Buy

The Digi® 6300-CX LTE cellular extender can help eliminate downtime by functioning as either the primary or backup cellular connection. It comes with a carrier-certified embedded cellular modem, for both 3G and 4G LTE with EV-DO fallback. Compatible with any dual-WAN networking appliance, this compact high-performance device achieves more reliable connectivity with your existing equipment.

Deployments are streamlined due to the installation accessories – a disposable battery pack for site survey, PoE injector for optimizing placement for best cellular reception, a mounting bracket -- everything you need for a quick and easy install. Ensure maximum uptime and performance with the flexibility to deploy solutions wherever you need connectivity at a lower cost than traditional Internet connections.

The Digi centralized management platform provides easy setup, configuration and support for installations of Digi and third-party devices. Digi Remote Manager® and aView ™ offer web-based device management solutions to securely monitor and control Digi enterprise routers and gateways -- and the health or your network -- after deployment.

This morning I installed the SIM card in The Digi 6300-CX LTE cellular extender, and it is all working now. I have all green bars. Using a speed test I was getting 30Mb down and 10Mb up. With my Mi-Fi I was only getting 10Mb down and 10Mb up. I give it a 5-Thumbs UP.

Larry Goodnough, Illuminate Technologies

6300-CX
 

Easy to Install and Find Optimal Location with Best
Signal Strength

Digi 6300-CX is a secure 4G/LTE cellular extender with embedded modem that can be used as a primary 4G/LTE data connection or as a backup network solution to streamline business continuity. When attached to Digi 6300-CX, any Ethernet device can utilize fast and convenient cellular data. It is not necessary to co-locate Digi 6300-CX with other telecommunications equipment; it is designed to be optimally located for the strongest cellular reception.

This eliminates the need for expensive and often ineffective external antennas, although one can be used if needed. The included passive power over Ethernet (PoE) adapter supports a greatly simplified installation and increases placement flexibility. Digi 6300-CX can operate either in IP Pass-Through or in full mode.

Designed for Primary or Failover Internet Access

Digi 6300-CX LTE cellular extender allows any Ethernet connected device to utilize cellular wireless data for either primary or failover internet connectivity. Carrier certified embedded cellular modem supports 4G/LTE and 3G connectivity. The Digi 6300-CX compact size (4.3 x 4.3 x 1 inches) makes it an ideal solution for your IoT applications.

6300-CX
6300-CX

Engineered for Easy and Optimal Installation

Digi 6300-CX LTE cellular extender ships with a temporary battery pack that can be used to perform a site survey to identify an ideal mounting location with optimal signal strength. The included PoE cable and extensive mounting hardware facilitate rapid installations.

2G/3G SHUTDOWNS: PLAN AHEAD TO STAY AHEAD

The shutdowns are coming sooner than you’d like. And Digi is here to help you plan ahead to avoid disruptions, lost data and – even worse – lost revenue. Digi LTE Migration Services is standing by with everything to make things go smoothly and quickly. What you need. Just in time.

BEAT THE 2G/3G SHUTDOWN

* For qualifying projects

MANAGE YOUR CONNECTIONS FROM THE CLOUD

The Digi 6300-CX can also be fully managed through Digi aView™, its cloud management portal with proactive alerts, centralized configuration, remote firmware updates and location services. The platform also allows for unlimited scalability as well as complete control over security and accessibility of enterprise devices. Whether users have 10 or 10,000 locations, the Digi 6300-CX can be fully managed through Digi aView™.

Learn More
Compare Digi Routers

SPECIFICATIONS Digi 6300-CX
SOFTWARE
REMOTE MANAGEMENT Digi aView™ (cloud based); SNMP v1/v2/v3 (support for Digi Remote Manager® 1Q2019)
PROTOCOLS RIP, RIPng, OSPFv2, OSPFv3, BGP, Babel, IS-IS
SECURITY AES, 3DES, IKEv1, OpenVPN, MODECFG, X509, SHA1, DES, MD5, RADIUS, TACACS+
PHYSICAL
DIMENSIONS (L x W x H) 4.3 in x 4.3 in x 1.0 in (109 mm x 109 mm x 25 mm)
WEIGHT 7.5 oz. (0.21 kg)
STATUS LEDs (1) Power / Cell Type, (5) Signal cellular strength
POWER REQUIREMENTS
POWER SUPPLY 15V DC, 800mA; 100-240 AC
OTHER Remote mounting kit, PoE injector and disposable battery for site survey
ENVIRONMENTAL
OPERATING TEMPERATURE 0° C to 40° C (32° F to 104° F)
STORAGE TEMP AND HUMIDITY -13° F to 167° F (-25° C to 75° C); 5% to 95% non-Condensing
APPROVALS
EMISSIONS / IMMUNITY FCC Part 15, Subpart B, Class B; CE, C-Tick/RCM; CAN ICES-3(B)/NMB-3(B)
CELLULAR SPECIFICATIONS
CELLULAR TYPE 6300-CX02 / 6300-CX03: CAT 3 LTE, EVDO, HSPA+, EDGE, GPRS and GSM; 6300-CX05: CAT 6 LTE-A
CELL ANTENNA (2) Dipole; Frequency: 700-960/1575-2700 hz; Gain: 1-4 dBi
SIM (1) SIM card slot (size 2FF)
CELLULAR CERTIFICATIONS PTCRB, Verizon, AT&T, Bell Canada, T-Mobile (North American SKUs); GCF (EU SKU); Telstra (AU / NZ)
INTERFACES
ETHERNET PORTS (1) 10/100 Base-T Ethernet port
WARRANTY
PRODUCT WARRANTY 3 years
Global Certifications and Band Support
SKU Countries/Region LTE Category 3G UMTS Bands 4G LTE Bands 3G EVDO
ASB-6300-CX01-OUS US, CA, MX 3 1, 2, 4, 5, 8 2, 4, 5, 13, 17, 25
ASB-6300-CX03-GLB EU, AU, HK, NZ, ZA 3 1, 2, 5, 8 1, 3, 7, 8, 20  
ASB-6300-CX05-GLB AU, NZ 6 1, 5, 7, 8 1, 3, 5, 7, 8, 28, 40  

Line Art

COUNTRY CERTIFICATIONS Digi 6300-CX
USA AND CANADA
CANADA FCC, PTCRB, Bell Canada
PUERTO RICO FCC, PTCRB, AT&T, Verizon, Sprint
UNITED STATES FCC, PTCRB, AT&T, Verizon, Sprint
US VIRGIN ISLANDS FCC, PTCRB, AT&T, Verizon, Sprint
EMEA
AUSTRIA GCF; CE
BELGIUM GCF; CE
BULGARIA GCF; CE
CROATIA GCF; CE
CYPRUS GCF; CE
CZECH REPUBLIC GCF; CE
DENMARK GCF; CE
ESTONIA GCF; CE
FINLAND GCF; CE
FRANCE GCF; CE
GERMANY GCF; CE
GREECE GCF; CE
HUNGARY GCF; CE
ICELAND GCF; CE
IRELAND GCF; CE
ITALY GCF; CE
LATVIA GCF; CE
LIECHTENSTEIN GCF; CE
LITHUANIA GCF; CE
LUXEMBOURG GCF; CE
MACEDONIA GCF; CE
NETHERLANDS GCF; CE
NORWAY GCF; CE
POLAND GCF; CE
PORTUGAL GCF; CE
ROMANIA GCF; CE
SLOVAKIA GCF; CE
SLOVENIA GCF; CE
SPAIN GCF; CE
SWEDEN GCF; CE
SWITZERLAND GCF; CE
UNITED KINGDOM GCF; CE
AP
AUSTRALIA GCF; CE; RCM C-Tick E1462
NEW ZEALAND GCF; CE; RCM C-Tick E1462

General

Does the Digi 6300-CX support EV-DO on the Verizon Network?

There are two Digi 6300-CX SKUs that are certified for use on the Verizon Network. SKU: ASB-6300-CX02-OUS supports LTE and EV-DO and SKU: ASB-6300-CX01-OUS only supports LTE on the Verizon Network. When ordering please specify the correct SKU.

Is the Digi 6300-CX certified for use outside of the United States?

Yes, the Digi 6300-CX SKUs ASB-6300-CX01-OUS and ASB-6300-CX02-OUS are supported in the United States and Canada, and ASB-6300-CX03-GLB is certified for use in the EU, Australia and New Zealand. View a complete list of certified countries.

Performance, Antennas & Signal Strength

How much loss do I get on a coax connection?

The frequency of the signal and the length of the cable determine the loss. Using a typical RG-6 coax cable at 1GHz frequency will result in a 6.1dB loss over a 100’ run (30.4 meters). In the real world that means a loss of one or even two bars of signal strength. One also needs to consider that average loss across any connectors with be 3dB. Remember that the goal of moving the transmitter is not to get acceptable signal, but excellent signal strength.

What about using signal amplifiers?

Whereas antennas provide reciprocal gain that benefits both sides of a connection, amplifiers work best at amplifying a transmitted signal. If you only add an amplifier to one end of a link with insufficient antenna gain, it will likely be able to be heard but will not be able to hear the other end.

Why does the Digi 6300-CX not lose signal strength like antenna solutions?

The simple answer is the cellular extender terminates all cellular activity in the remote optimally placed device and converts all cellular based IP packets to wireline IP packets allowing a “signal-loss-free” connection.

What if I cannot get signal strength inside of a building and must use an antenna?

The ideal solution is to place the Digi 6300-CX as close as possible to the opening used for an external antenna to make the coax connection as short possible. When connecting an external antenna is must be connected to the primary antenna port, which on the Digi 6300-CX is the port labeled ANT2.
The Digi 6300-CX will automatically recognize it is being used with a single external antenna, without requiring any additional configuration.
For maximum and best performance we recommend using the Digi 6300-CX with dual antennas.

Can I use a single antenna with the Digi 6300-CX?

For maximum performance, attach both of the included antennas. If a single antenna solution is required, it must be attached to the main antenna port labeled ‘ANT2’.

Remote Management with Digi aView

Is it possible to manage my devices remotely?

The recommended solution for device configuration and management is to use our cloud based management tool, Digi aView. Digi aView allows you to control devices individually or simplify your management by configuring changes to be pushed to groups of devices, regardless of their geographic location.
The Digi aView management portal provides the following capabilities for your Digi 6300-CX.

  • Monitoring details including signal strength, network connectivity details (RSRP, CNTI, RSRQ, Ec/Io, etc.), SIM
  • Card details (IMEI, IMSI, ESN, etc.), data transmitted/received, and more
  • Email notifications based on connectivity, device firmware, and signal strength
  • Remote control
  • Out of band SMS recovery

For more information on the configuration and management capabilities of Digi aView, see the Digi aView User’s Guide

 

What firewall access is required for the Digi 6300-CX to access Digi aView?

The Digi 6300-CX requires access to the following IP address in order for full connectivity between Digi aView.

128.136.167.120 - port UDP 123 UDP 514 TCP 443 UDP 500 UDP 4500 - time.accns.com / configuration.accns.com / firmware.accns.com / certs.accns.com / logs.accns.com / remote.accns.com (time/config/firmware/certs/syslog)

Local Device Management/Access

How do I access the local UI of the Digi 6300-CX using DHCP?

  1. Using a standard Ethernet cable, connect your Windows or Mac PC Ethernet port to the WAN Ethernet port of the device.

  2. Wait approximately one minute for your PC to recognize and communicate with the DHCP server in your Digi device.

  3. Enter the destination http://192.168.210.1 in your browser.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

    3. If you receive an error that the destination was not reachable, your device may be running an older version of our device firmware. See the instructions below to connect using a static IP address.

  4. Login to the device using the default account:

    • Username: root

    • Password: default

How do I access the local UI of the Digi 6300-CX using a Static IP address?

  1. If your device is running device firmware prior to 16.3.15, to manually connect to the device, you must manually set an IP address on your PC to be able to communicate with the Digi 6300-CX. First, select the Properties of the relevant network connection on your PC.
    Faq1

  2. Click the Internet Protocol Version 4 (TCP/IPv4) parameter and select Properties and configure with the following details.
    Faq2

  3. Enter the destination: http://192.168.210.1 in your browser and hit Enter.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

  4. Logon to the device using the default account:

    • Username: root

    • Password: default

       

How to I gain SSH access into the Digi 6300-CX?

  1. Using a standard Ethernet cable, connect your Windows or Mac PC Ethernet port to the WAN Ethernet port of the device.

  2. Wait approximately one minute for your PC to recognize and communicate with the DHCP server in your Digi device.

  3. Enter the destination http://192.168.210.1 in your browser.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

    3. If you receive an error that the destination was not reachable, your device may be running an older version of our device firmware. See the instructions to connect using a static IP address then continue with Step 5 below.

  4. Login to the device using the default account:

    • Username: root

    • Password: default If using DHCP to access your device, usinga SSH tool (such as PuTTY for Windows, or openssh for Linux/Mac) open an SSH session to 192.168.210.1. OR, if using a Static IP address to access your device, open an SSH session to 192.168.210.1.

  5. Login to the device using the default account:

    • Username: root

    • Password: default You will be prompted to enter the Admin CLI or the Shell of the device.

      1. Admin CLI – a limited command line interface for interacting with the device. You can run ping tests, change configuration settings, send AT commands, etc.

      2. Shell – a full Linux shell console.

      3. If are not prompted to login to the Admin CLI or Shell, and are instead immediately prompted with a # prompt, you are in the Admin CLI by default. If you want to change to the shell console, you can enable it by typing in the following two commands.

        1. config set auth user root password default

        2. config set auth group admin acl shell enable true
           

API Support

What APIs does Digi Offer?

Digi aView provides a RESTful API that can be used to obtain a list of details for one or more devices a user has access to. Full documentation on using the API can be found at the following link: https://www.digi.com/aviewapidocs

Network Configuration/Connectivity

What is an APN?

Each carrier has a set of default Access Point Names (APNs) for their network. Digi automatically attempts connection using the below default APNs. If your carrier has provided you with a custom APN, you will need to configure the device to connect to the custom APN. Refer to the question below How do I configure a custom APN? for more information.

This below list of APNs are automatically attempted by the Digi 6300-CX and are not considered custom.

AT&T

  • i2gold

  • 10008

  • 11315

  • managedvpn

  • broadband

  • MNS-OOB-APN01.com.attz

  • m2m.com.attz

Verizon

  • mw01.vzwstatic

  • ne01.vzwstatic

  • so01.vzwstatic

  • we01.vzwstatic

  • vzwinternet

Sprint

  • blank

Generic

  • blank

  • i2gold

  • 10008

  • 11315

  • managedvpn

  • broadband

  • MNS-OOB-APN01.com.attz

  • m2m.com.attz

  • mw01.vzwstatic

  • vzwinternet

  • telstra.internet

  • epc.tmobile.com

  • mobinilweb,internet

  • web.vodafone.de

  • everywhere

  • internet.com

  • inet.bell.ca

  • isp.telus.com

  • internet.telecom.co.nz

  • inetgsm.vzw3g.com

  • isp.cingular

  • internet

  • internet.t-mobile

  • everywhere

     

How do I configure a custom APN?

  1. Power on your Digi 6300-CX.

  2. Using a standard Ethernet cable, connect your Windows or Mac PC Ethernet port to the WAN Ethernet port of the device.

  3. Wait approximately one minute for your PC to recognize and communicate with the DHCP server in your Digi device.

  4. Enter the destination http://192.168.210.1 in your browser.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

    3. If you receive an error that the destination was not reachable, your device may be running an older version of our device firmware. See the instructions below to connect using a static IP address then continue with Step 7 below.

  5. Login to the device using the default account:

    • Username: root

    • Password: default

  6. Select the Configuration tab on the left side of the page.

  7. Type in the custom APN into the APN entry located in the Modem section of the configuration.

    1. Optional: If the custom APN requires a specific username and password, please input those into the Username and Password entries.

  8. Click the Save button.

  9. IMPORTANT: If you will be using Digi aView to manage your device, any configuration settings in Digi aView take precedence over any settings configured manually using the Local UI. You must also configure your custom APN in Digi aView. Please refer to the Digi aView User’s Guide for more information.

How do I upgrade the firmware of the Digi 6300-CX?

  1. Download the appropriate firmware file.

  2. Power on your Digi 6300-CX.

  3. Using a standard Ethernet cable, connect your Windows or Mac PC Ethernet port to the WAN Ethernet port of the device.

  4. Wait approximately one minute for your PC to recognize and communicate with the DHCP server in your Digi device.

  5. Enter the destination http://192.168.210.1 in your browser.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

    3. If you receive an error that the destination was not reachable, your device may be running an older version of our device firmware. See the instructions to connect to the local UI using a static IP address then continue with Step 7 below.

  6. Login to the device using the default account:

    • Username: root

    • Password: default

  7. Select the System tab on the left side of the page.

  8. Select the Browse button next to the Firmware image section.

  9. Browse for and select the firmware file downloaded in Step 1 above.

  10. Click the Update Firmware button. Do not turn off or unplug the device while it is upgrading its firmware. The upgrade process should take less than one minute.

  11. IMPORTANT: If you will be using Digi aView to manage your device, any configuration settings in Digi aView take precedence over any settings configured manually using the Local UI. You must also configure your custom APN in Digi aView. Please refer to the Digi aView User’s Guide for more information.

What if I change my cellular carrier? How do I update the modem firmware of the of the Digi 6300-CX to use a different cellular carrier (e.g. AT&T to Verizon)?

The modem firmware can only be updated through the local UI and cannot be updated or managed using Digi aView.

  1. Insert your size 2FF mini-SIM card into the Digi 6300-CX.

  2. Power on your Digi 6300-CX.

  3. Using a standard Ethernet cable, connect your Windows or Mac PC Ethernet port to the WAN Ethernet port of the device.

  4. Wait approximately one minute for your PC to recognize and communicate with the DHCP server in your Digi device.

  5. Enter the destination http://192.168.210.1 in your browser.

    1. Your browser may give you a warning that the site is insecure because your Digi device uses a self-signed security certificate.

    2. Click the option to continue to the site.

    3. If you receive an error that the destination was not reachable, your device may be running an older version of our device firmware. See the instructions to connect to the local UI using a static IP address then continue with Step 7 below.

  6. Login to the device using the default account:

    • Username: root

    • Password: default

  7. Click on the System tab. Scroll down to Modem Firmware section and select your provider in the Install Modem Firmware dropdown box.
    Faq3

  8. Click the Install Firmware button.

  9. A status bar will appear & update as the new modem firmware is installed. During the upgrade, the status LED on the front of the device will alternate flashing red and yellow.
    Faq4

  10. When the new modem firmware is complete, the progress bar reaches 100% and the status LED stops flashing red/yellow.

  11. The modem firmware is updated and will attempt to connect with the SIM card.

     

My Digi 6300-CX can't connect, what should I do?

If the LED of your Digi 6300-CX is flashing white and remains flashing white for more than two minutes, your Digi 6300-CX is having difficulty connecting to your carrier’s cellular network.

  1. Check is that the SIM card is fully inserted in the SIM slot of the Digi 6300-CX.

    1. If you have to re-insert the SIM card, turn the Digi 6300-CX off, re-insert your SIM card, then turn it back on again.

  2. Verify that both antennas are properly connected to the two connectors on the back of the Digi 6300-CX.

  3. Check the signal strength LEDs on the Digi 6300-CX.

    1. If none of the five signal LEDs ever illuminate on the Digi 6300-CX, even after waiting a few minutes once the status LED is flashing white, the Digi 6300-CX may be unable to read the SIM card, contact your cellular carrier and confirm the SIM card is valid and active.

  4. Attempt to connect using an alternate SIM card

    1. If the Digi 6300-CX does not work with an alternative SIM card, and none of the signal strength LEDs illuminate, contact Digi support to verify if an RMA/Return is required.

If you have at least one signal strength bar illuminated, this indicates the Digi 6300-CX is able to detect the SIM card's presence, but if the status LED continues to flash white for more than two minutes, it is having difficulty using the SIM card to establish a cellular connection.

  1. Ensure the SIM card does not have a custom APN configured. If the SIM card requires a custom or non-standard APN to connect, you will need to configure the Digi 6300-CX to use that custom APN.

  2. Try connecting the SIM card to another device (USB modem, phone, etc.). If it connects with the other device, observe what settings the device used to establish the connection, in particular the APN used. If this differs than the standard APN for the carrier, please configure this APN into the Digi 6300-CX; refer to the FAQ How do I configure a custom APN? section above.
     

My cellular extender needs to perform connectivity tests, but cannot ping the default gateway IP. What can I ping instead?

In passthrough mode, the Digi 6300-CX operates as a transparent bridge and all traffic on all ports is passed directly to and from the client device connected to the device’s Ethernet port. In passthrough mode, a single IP address will be available through the device’s Ethernet port. Only one client device can be connected to the Digi 6300-CX through its Ethernet port at a time.

With some cellular carriers, the gateway IP address does not respond to ping requests. Several different types of client routers will try to ping the gateway IP address from the passthrough connection in order to validate network connectivity. As an alternative the following two IP addresses can be pinged instead to verify connectivity.

  • 192.168.211.50 - This is a private IP address that is the internal endpoint IP for the remote control IPSec tunnel the Digi 6300-CX establishes. Pinging this IP address will confirm not only physical connectivity to the Digi 6300-CX, but internet connectivity through the cellular network, since the Digi 6300-CX requires internet connectivity to establish this tunnel.

  • 192.168.210.1 - This is the default IP address of the Digi 6300-CX on its LAN Ethernet port.

To help explain these two IPs and the network setup, refer to the below diagram.

Faq5

 

How do I Set up and configure VLAN Trunking for the Digi 6300-CX?

Goal

The primary benefit of the VLAN features on the Digi 6300-CX is to provide multiple LAN networks on a single Ethernet port. This allows users to create a segmented network, where certain devices are sectioned off in their own network, for increased performance, improved manageability, simplified software configurations, and increased security options.

Technical Details

What the Digi 6300-CX supports is closest to a trunked VLAN behaviour. That is, the Digi 6300-CX supports multiple VLANs per Ethernet port, the packets arrive with tags already, and it doesn't add tags to the incoming packets. The difference is that since the Digi 6300-CX acts as a router, we can't forward the tag on. The Ethernet header and VLAN tag are stripped before the packet enters the IP stack. So to the IP stack, it appears as the packet appeared on a virtual interface called "eth0.%d", and it needs to decide how to route the packet based on that. There's no concept of a trunk interface that sends and receives all VLAN tags. The outgoing packet will then only have a VLAN tag if it is being routed out one of these virtual interfaces, and this VLAN tag doesn't have to be the same as the VLAN tag on the incoming packet.

Example Setup



Faq6

Sample Configuration

The following configuration reflect the VLAN trunking setup in the diagram, where we have two trunked VLAN interfaces on the Digi 6300-CX's LAN Ethernet port. Also, please ensure that the Modem ? Passthrouth ? Enabled option is un-checked, as enabling passthrough mode will override any VLAN settings.

Faq1

 

Tracking cellular data usage

How much cellular data is used for status and logging operations of the Digi 6300-CX?

Monthly usage without an IPSec tunnel enabled is between 1.8 MB - 2MB including startup activities performed a single time at device installation.
Monthly usage with an IPSec tunnel enabled is between 30-120MB depending on device settings.
If your plan provides for limited cellular data, contact Digi Support for assistance configuring your devices to minimize cellular data usage.

Can I track cellular usage of my devices?

Cellular data usage is tracked using Digi’s cloud based device management system, Digi aView. Refer to the Data Plan section of the Digi aView User's Guide for details on how to setup cellular usage tracking.

How quickly will a device send cellular usage updates to Digi aView?

The usage chart within Digi aView first updates within thirty minutes of first powering on the Digi 6300-CX. Then, the Digi 6300-CX sends a status update once every thirty minutes to Digi aView.

Can I set alerts to track cellular data usage?

Using the Digi aView management site, alerts can be generated if a device exceeds a specified data usage limit per month. Additionally, pooled data plans and group overage notifications can be setup to generate alerts if a group of devices exceed a specified data usage limit per month.

For more information on configuring alerts, see the Digi aView User’s Guide

How quickly will I receive a Cellular Data Group Overage Notification?

A group quota overage notification is sent within one hour of exceeding the specified data limit. However, it only sends the group data plan notification to users that are in the same Digi aView organization as the data plan.

How do I see the usage of all the devices belonging to a plan?

To view the usage of all units belonging to a plan, generate a Cellular Utilization report, which will list the utilization for all devices in a desired organization. You can find the Cellular Utilization report under the Reports drop-down on the navigation bar on the left side of the Digi aView management site. This will generate a Cellular Utilization report for all the devices in the selected organization, not just those assigned to a particular data plan. To view just the devices assigned to a particular data plan, click on the data plan name on the organization details page, under the Data Plans tab.

Can I export the data usage graph?

The ability to export the raw data from the usage graph is currently not available. You can only export the data usage graph to an image format (png, jpeg, etc.) or as a PDF.

Firmware

Recently Viewed