Have a Question?

Serial Cables

For Digi One, PortServer TS, PortServer II, and Multi-Port Adapters with RJ-45 connectors

Cable-to-Adapter Cross Reference

For ConnectPort TS and LTS, PortServes TS, Digi Neo and other Digi products with RJ-45 10 pin Connectors.

Note: Digi Passport, Digi CM and Etherlite use different pinouts, please refer to the appropriate product documentation

RJ-45 to Male or Female Straight or Crossover Application Cable or Adapter Part Number   Cable Identifier
DB-9 F Crossover Bay Accelar, Nortel and other DB-9 DTE devices Cable 76000645 (4’) How to buy 61090048
Adapter (4-Pack) 76000697 How to buy N/A
DB-9 M Crossover DTE devices with DB-9 female ports Cable 76000264 (4’) How to buy 61080048
Adapter None None N/A
DB-9 F Straight Modems and other DCE devices with DB-9 male ports Cable 76000201 (4’) How to buy 61070024
61070048
Adapter None None N/A
DB-9 M Straight Modems and other DCE devices with DB-9 female ports Cable 76000240 (4’) How to buy 61060024
61060048
Adapter (4-Pack) 76000701 How to buy N/A
 
DB-25 M Crossover Sun Sparc, Sun Ultra, terminals, printers and other DTE devices with DB-25 female ports Cable 76000238 (4’) How to buy 61040048
Adapter (4-Pack) 76000698 How to buy N/A
DB-25 F Crossover Cisco, IBM and other DTE devices with DB-25 male ports Adapter (4-Pack) 76000699 How to buy N/A
DB-25 M Straight Modems and other DCE devices with DB-25 female ports Cable 76000195 (4’) How to buy 61020024
61020048
Adapter (4-Pack) 76000700 How to buy N/A
DB-25 F Straight Modems and other DCE devices with DB-25 male ports Cable 76000199 (4’) How to buy 61030024
61030048
Adapter None N/A
DB-25 M *Special* For use with printers. This cable utilizes the DTR signal (instead of RTS) for hardware flow control. Adapter (4-Pack) None N/A N/A
 
RJ-45 M *Special* For use with Cisco and Sun RJ-45 console ports. Cable 76000631 (6’) How to buy 63000222-02
  • All RJ-45 to DBx cables are 10-pin. Only the RJ-45 to RJ-45 cable is an 8-pin cable.
  • All RJ-45 adapters are 8-pin. When using these adapters with modems or other applications that require DCD on pin 1, you must turn on altpin.
  • If altpin is turned off, the hardware signal on pin 1 becomes DSR instead of DCD. This alternative can be used if DCD is not required, and DSR is needed instead.
Contact a Digi expert and get started today! Contact Us