Using the Acceleport RAS adapter with Zetafax in Windows NT 4.0.


Symptom:

Zetafax will not fax with the Acceleport RAS card

 

    Cause:

    Class 1 Faxing is enabled

     

      Solutions:

      By default when running the Zetafax setup program Class 1 is enabled if available. To use the Digi AccelePort RAS you will need to disable Class 1 and use Class 2 or 2.0. To disable Class 1, look at the following link:

       

        Removing Class 1 from the Zetafax Setup Configuration Wizard

        Last updated: Jul 09, 2019

        Recently Viewed

        No recently viewed articles