How do I rack-mount the Digi Connect EZ 16 (EZ16-C100)

Question

I need interface detail for mounting the EZ16-C100 server.

Answer

The Connect EZ 16 (EZ16-C100) ships with rack-mount ears pre-attached, so no bracket assembly is required before installation. Mount it in a standard 19" rack by aligning the pre-attached ears with the rack rails and fastening with rack-appropriate screws (Digi does not supply the rack screws — use the type your rack requires). See the Connect EZ 16/32 User Guide for the mounting procedure and the product page for full physical dimensions.

Reference material

• Connect EZ 16/32 User Guide — “Mount the Connect EZ 16/32 on a rack” (doc 90002540):
  https://docs.digi.com/resources/documentation/Digidocs/90002540/device/connectez-16-32/content/hw-cez1632-mount.htm
• Digi Connect EZ 16 MEI (EZ16-C100) product page — dimensions and what's in the box:
  https://www.digi.com/products/models/ez16-c100
• Connect EZ 16/32 User Guide (full):
  https://docs.digi.com/resources/documentation/digidocs/90002540/default.htm