HOW TO: Force a Digi Smart Energy Routing Gateway to Leave the Network
There are cases where the Digi Smart Energy routing gateway needs to be re-provisioned to a Smart Energy coordinator, such as a Smart Meter. Once the Digi Smart Energy router is removed from the coordinator/trust center, the ATNR command can be sent in order to force the Digi Smart Energy router to leave the network and go back to scanning for a new network.
This will require a Device Cloud account. Login to https://digi-se.appspot.com using your Device Cloud credentials. Select the Debug Console tab, then collapse RPC_ZigBee_Interface menu on the left, then select the xbee_AT option. In the Input window, use the following syntax:
Click Execute to send the command.
Last updated: Aug 23, 2017