Support / Knowledge Base / HOW TO: Obtain XBee Tracing From a ConnectPort X2 SE Smart Energy Gateway

HOW TO: Obtain XBee Tracing From a ConnectPort X2 SE Smart Energy Gateway

HOW TO: Obtain XBee Tracing From a ConnectPort X2 SE Smart Energy Gateway

Use a terminal emulator, such as, Microsoft Telnet or PuTTY to telnet to the gateway.  From the command line of the gateway, issue the following command:

#> set trace mask=xbee:+*

The results will scroll quickly on the screen.  Let the tracing run until the desired behavior is replicated, then press [Ctrl]-C to stop the tracing, save the session results and send to Digi Tech. Support for analysis.


Last updated: Aug 08, 2017

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us