Support / Knowledge Base / What Should be Entered For a (Smart/ERT) Meter Multiplier/Divisor?

What Should be Entered For a (Smart/ERT) Meter Multiplier/Divisor?

What Should be Entered For a (Smart/ERT) Meter Multiplier/Divisor?

There is no set value for this field as this will vary depending on the meter model and type.

With that being said, it is recommended you start out with the default and then adjust the multiplier setting until the reading matches the reading seen on the face of the actual meter.
Last updated: Aug 23, 2017

Filed Under

Gateways

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us