Support / Knowledge Base / How to Enter the Python Engine with the XBee Cellular module

How to Enter the Python Engine with the XBee Cellular module


The XBee Cellular module supports Python directly within its firmware. To enable this function, set the AT AP command to a value of 4 <carriage return>. Then enter ATCN to exit command mode.  Enter another carriage return after exiting command mode. The radio should now be in programming mode. 


Example:

+++

ok

ATAP4 <CR>

ok

ATCN <CR>

ok

<CR>

>>>   (This indicates that the radio is now in Python programming mode. )

Last updated: Sep 28, 2017

Filed Under

RFRF Dev kits

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us