Digi IX30 — FirstNet Capable LTE Cat 4 global (select regions/carriers), 3G/2G fallback, dual Ethernet, RS-232/422/485, GNSS, edge computing

Digi IX30 with Digi 360 — FirstNet Capable LTE Cat 4 global, 3G/2G fallback, dual Ethernet, RS-232/422/485, GNSS, edge computing

• Cellular connectivity:
  • FirstNet Capable™ LTE Cat 4 global / Anterix™ Active (select regions/carriers*)
    • LTE Cat 4 — FDD: B1, B2, B3, B4, B5, B7, B8, B8_US (Anterix™), B9, B12, B13, B14 (FirstNet®), B18, B19, B20, B25, B26, B28;
    • WCDMA: B1, B2, B4, B5, B6, B8, B19;
    • GSM: B2, B3, B5, B8;
    • GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
  • Connectors: (3) 50 Ω SMA (2x cellular, 1x GNSS);  center pin: female
  • SIM slots: (2) mini-SIM (2FF)
  • eSIM support: Digi eSIM 2FF accessory for remote carrier switching
  • SIM security: secured in cellular module
  • GNSS: protocol NMEA 0183 V3.0; acquisition time hot start 1 s; warm start 29 s; cold start 32 s; accuracy horizontal: < 2 m (50%), < 5 m (90%); altitude: < 4 m (50%), < 8 m (90%); velocity: < 0.2 m/s
• Software and management: 
  • Remote management: Digi Remote Manager®, SNMP v1/v2c/v3 (user installed/managed), SMS
  • Local management: web UI (HTTP/HTTPS); CLI (Telnet, SSH, Serial)
  • Management / troubleshooting tools: FTP, SFTP, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP; NTP/SNTP
• Ethernet: 
  • ​Ports: (2) RJ-45; 10/100 Mbps (auto-sensing)
• Serial: 
  • (1) DB-9 DTE
  • RS-232/422/485
  • Signal support: TXD, RXD, CTS, DTR, DCD, DSR, RI
  • Flow control: software (XON/OFF), hardware supported
• I/O: 
  • Connector: 12-pin screw down terminal block
  • Digital: 0 to 30 VDC, 200 mA max.; (4) I/O, software-selectable; pulse counter input
  • Analog: (4) analog I/O; 4 to 20 mA or 0 to 10 V, software-selectable; 12-bit resolution
• USB: 
  • Ports: (1) USB 2.0 Type A; 5 V 500 mA max
• Memory: 
  • 1 GB RAM, 8 GB flash
• Physical: 
  • ​Dimensions (L x W x H): 12.8 cm x 10 cm x 5.2 cm (5.04 in x 3.94 in x 2.05 in)
  • Weight: 0.5 kg (1.1 lb)
  • Status LEDs: Signal Strength (5), LTE, Power
  • Enclosure/Rating: aluminum / IP30
  • Mounting: DIN rail mount
• Power requirements: 
  • Power input: 9 to 30 VDC, 18 W min power source required
  • Power connector: screw down removable terminal block
  • Power consumption: 1.5 W (light traffic flow), 3.5 W (peak data transmission); 1 W (low power mode, idle traffic, no serial/no Ethernet WAN)
• Environmental: 
  • Hazardous (Class 1 Div 2): complete
  • Operating temperature: −34 °C to 74 °C (−29 °F to 165 °F); reduced cellular performance may occur above 60 °C (140 °F)
  • Storage temperature: −40 °C to 85 °C (−40 °F to 185 °F)
  • Ethernet isolation: 1.5 kV RMS
  • Serial port protection (ESD): 15 kV
  • Relative humidity: 5% to 95% (non-condensing)
• Approvals: 
  • ​Cellular (IX30-0EG4): FCC, PTCRB, CE, RED, UKCA, RCM, Verizon, T-Mobile, AT&T FirstNet Capable™, Anterix™ Active; visit product certifications for latest cellular certifications
  • Safety: Hazardous locations: ANSI/ISA-12.12.01-2015, CAN/CSA C22.2 NO.213-15; Ordinary locations: UL 62368-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition; ATEX standards: Protection method II 3 G Ex nA IIC T4 Gc; EN 60079-0:2012+A11:2013, EN 60079-15:2010, DEMKO 15 ATEX 1574X Rev. 1
  • IECEX standards: US/UL/ExTR17.0077/00
  • Emissions / Immunity: CE, RED, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 322
  • Environmental: RoHS3
• Product warranty: 3-year**
• Available accessories: accessories not included; view available accessories
  • IX30 Accessory Kit — PSU, antennas, Cat 6 Ethernet cable, GPS antenna: 76002113 (recommended)
  • Power supply (required, choose industrial extended temperature or commercial)
    • Power supply — 18 VDC, 1 A, wall mount level VI, industrial temperature, changeable plug tips, 2-pin combicon screw terminal plug: 76002104
    • Power supply — 18 VDC, 1 A, wall mount level VI, commercial temperature, changeable plug tips, 2-pin combicon screw terminal plug: 76002117
  • Antenna — 5G/LTE 600 MHz - 6 GHz, swivel, black: 76002114 (recommended / optional)
  • Antenna base — SMA, 1 m, RG174: 76000954 (recommended / optional)
  • Cable — UTP, Cat 6, 2 m (6 ft), black, flat patch cable: 76002106 (recommended / optional)
  • Digi eSIM — 2FF triple-cut layout accessory: DG-ESIM-A

Digi eSIM support

Digi IX30 (IX30-0EG4) supports the optional 2FF Digi eSIM accessory, enabling remote carrier switching, zero-touch activation and enhanced WAN flexibility.

What's in the box

• Digi IX30 — FirstNet Capable LTE Cat 4 global (select regions/carriers*), 3G/2G fallback, dual Ethernet, RS-232/422/485, GNSS, edge computing

Includes Digi 360

Digi IX30 includes the Digi 360 solution with warranty, customer care and Digi Remote Manager® cloud management, enabling easy setup, mass configuration and management.