1. Connect the console port on the rear panel of the Digi unit to a serial port on a workstation. Use an Ethernet cable with a DB-9 adapter.
2. Set up a terminal emulation program such as HyperTerminal. Use the following port parameters: bps=9600, data bits=8, parity=none, stop bits=1, flow control=none
3. Reboot or power on the Digi unit.
4. Press the ESC key within three seconds of applying power to the device.
Options from here (hidden):
-- control-t This sets the model type of the unit.
-- control-s This sets the serial number.
-- control-a This sets the MAC address. This option should never be passed on to the customer.
May 29, 2019