You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

How do I hook power up to the WR44RR M12 power cable

Connect the M12 connector end of the cord to the
9-36VDC connector on the device, and wire the four bare wires according to
your needs. The brown and blue wires provide basic DC power input, and the black and white wires are GPIO signal lines.
Pin 1: Power +ve (Brown)
Pin 2: GPIO 0 (Whlte)
Pin 3: Power -ve (Blue)
Pin 4: GPIO 1 (Black)
Last updated: Feb 27, 2019

Recently Viewed

No recently viewed articles

Did you find this article helpful?