Support / Knowledge Base / JTAG Booster vs Digi USB JTAG link

JTAG Booster vs Digi USB JTAG link

Since 2016 May the Digi JTAG Booster DG-ACC-JBST FS-285 is discontinued and end of life (see PN#160506-06). As a replacement to program flash or debug applications customers may consider the Digi USB JTAG Link (aka Segger debugger) DG-ACC-JLNK see: https://www.digi.com/products/models/dg-acc-jlnk The following embedded devices may be programmed/debugged with the USB JTAG Link:
  • ConnectCore 7U
  • Connect (Wi-)ME (9210) -JTag
  • ConnectCore (Wi-)9C (NAND flash)
  • ConnectCore (Wi-)9M2443
  • ConnectCore (Wi-)9P9215
  • ConnectCore 9P9360/9750
See also recovery instructions: http://ftp1.digi.com/support/documentation/ubootrecover.zip
The ConnectCore XP270 is not supported by the USB JTAG Link and ConnectCore 9U can only be flashed with additional JLink Flash License from http://www.segger.com
Last updated: Aug 08, 2017

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us