You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

Pinouts for Connecting from One Port to Another Port on Digi CM and/or Digi Passport Units (port to port)

 

The following cable pinout applies for connecting from one port to another port on Digi CM or Digi Passport units:

RJ45                       RJ45
=======                =======
1 CTS                     8 RTS
2 DSR                     7 DTR
3 RxD                     6 TxD
4 GND                    5 DCD (can also be used as GND)
5 DCD (GND)         4 GND
6 TxD                     3 RxD
7 DTR                     2 DSR
8 RTS                     1 CTS
Last updated: Jan 11, 2024

Recently Viewed

No recently viewed articles

Did you find this article helpful?