You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

Wireless industrial remote control for analog applications

Q: Can I use Digi 900Mhz or 2.4GHz radios as a wireless remote control for analog applications such as wireless relays, dry contacts, or 4-20mA applications?

A: Yes. The modules themselves do not have the signal conditioning built in for relay or dry contact passing, so we recommend working with one of our partners who have provided a complete solution.

I. BWI Eagle offers long range wireless industrial remote controls.

These remote controls can be used for a variety of applications: 

Wireless conveyer belt control
Wireless dry contact
Wireless relay or relays
Radio frequency
Industrial remote controls
Wireless gate opener control 
Wireless On/off signal for controlling electrical motors
Wireless pump controller
Wireless traffic control

Contact BWI Eagle for more information. 

BWI Eagle, Inc.
238 Pillow Street
Butler, PA 16001
Phone: 724-283-4681
Fax: 724-283-5939

II. B&B Electronics

(232DRIO and 232IOEXT products plug directly into our stand-alone PKG-R products.)

III. Wilkerson Instruments Co., Inc.

Long range, wireless 4-20mA solutions.

Last updated: Aug 08, 2017

Recently Viewed

No recently viewed articles

Did you find this article helpful?