Home/Support / Knowledge Base / 5V interface and the XBee

5V interface and the XBee


Question:
Do the Digi XBee modules Support 5V on any of the radios pins?

Answer:
No, the Digi XBee is a 3V device.  Unless otherwise stated in the manual, the Digi XBee modules do not accept 5V on any of their pins.  In order to connect the 3V XBee to a device operating at a different voltage, a level shifter or translator is required.
Last updated: Aug 23, 2017

Filed Under

RFRF Dev kits

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us