You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

Capturing a DSL Trace with Digi TransPort

  1. Login to the Web Interface and navigate to Management> Analyser > Settings.
  2. Change the Maximum packet capture size to 1500 bytes.
  3. Change the Log size to 180 Kbytes.
  4. Check the box under DSL PVC Sources for PVC 0.
  5. Check the box under PPP Interfaces for PPP 3.
  6. Uncheck all other boxes and click Apply.
  7. Navigate to the Management > Analyser >Trace, and click Clear Trace to remove any existing data.
  8. Wait a few minutes for the DSL to try and establish, then click Refresh.
  9. Copy and paste all of the output into a text file.
Last updated: Jan 12, 2024

Filed Under


Recently Viewed

No recently viewed articles

Did you find this article helpful?