You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

Digi ASYNC card will not install starting at COM1 in Windows 2000

Symptom:

I want the serial ports of my Digi ASYNC card to start on COM1, but the adapter will not install correctly. The native serial/COM port(s) have been disabled in the BIOS prior to the installation of the Digi ASYNC card.

 

Solutions:

At least one serial/COM port must be enabled for the ASYNC driver to install properly. Then you may disable the native port(s) in the BIOS and renumber the Digi COM ports as needed.

Last updated: Jan 10, 2024

Filed Under

Network

Recently Viewed

No recently viewed articles

Did you find this article helpful?