Support / Knowledge Base / DIO line passing and XBee modules using Mesh

DIO line passing and XBee modules using Mesh

Question:
Do any of the XBee modules that support the mesh protocol also support digital IO line passing such as the XBee 802.15.4 module does?

Answer:
The only module to support direct, pin-to-pin, line passing with a simple configuration, is the 802.15.4 XBee.  However, the programmable versions of the XBee (which contain a separate, programmable Freescale processor) can be programmed for this one-to-one pin pass through functionality. This program is not provided by Digi in our sample library however there are examples that demonstrate high and low pin control. You can see these the Python and XBee programming kits or suites.
Last updated: Aug 23, 2017

Filed Under

EmbeddedGatewaysRF

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us