How to boot Wince image from USB stick on Wi-i.MX51 JSK?

1. USB stick must be formatted either in FAT, ext2 or ext3 file system.
   (This knowledge base article explains FAT format with one partition).
2. Copy default wince image (wce-CCXMX51) onto the USB stick.
3. Connect USB stick to one of the USB host ports eg: J10 on the CCWi-i.MX51 JSK.
4. Set environment variable "bootcmd" as follows:
    #setenv bootcmd dboot wce usb 0:1 fat wce-CCXMX51
5. Reset the board, module will boot from the USB stick.

Last updated: Jun 06, 2019

Recently Viewed

No recently viewed articles

Did you find this article helpful?