Home/Support / Knowledge Base / HOW TO: Configure CUPS Printers for Hardware Flow Control Instead of the Default Software Flow Contr

HOW TO: Configure CUPS Printers for Hardware Flow Control Instead of the Default Software Flow Control

HOW TO: Configure CUPS Printers for Hardware Flow Control Instead of the Default Software Flow Control

Change the printer configuration (/etc/cups/printers.conf) file to reflect hardware flow control.

Here is an example:

DeviceURI serial:/dev/ttya01?baud=9600+size=8+parity=none+flow=hard

 
 

Last updated: Aug 08, 2017

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us