Home/Support / Knowledge Base / HOW TO: Configure Ports on Digi One/PortServer Products for Binary Data

HOW TO: Configure Ports on Digi One/PortServer Products for Binary Data

HOW TO: Configure Ports on Digi One/PortServer Products for Binary Data

Configure the port for binary (raw) mode. This can be done by telnetting to the unit and logging in as root. Here is an example for port one:

#> set port range=1 bin=on
#> kill tty=1

Then use the raw 2100 socket instead of the 2000 telnet socket (2101 through 2116 on a sixteen port unit) to connect.


Last updated: Aug 23, 2017

Filed Under

Network

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us