You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

HOW TO: Forward All Traffic on Digi TransPort Routers Using a Static NAT Rule

 

This can be accomplished by adding a rule to the existing firewall.  Below is an example on forwarding all inbound traffic to 192.168.1.100:
 
pass in break end from any to addr-ppp 1 -> to 192.168.1.100
Last updated: Jan 12, 2024

Filed Under

Cellular/Transport

Recently Viewed

No recently viewed articles

Did you find this article helpful?