You are viewing an article about an obsolete product. Information on this page is provided as-is and not supported.

HOW TO: Obtain A Serial Trace From A Digi TransPort Router


The following steps outline how to obtain a trace from a Digi TransPort serial port:

From the web interface of the Digi TransPort unit select: 

Management-Analyser> Settings  

-Enable Analyser 

Use the check box to enable the analyser.

Under Serial Interfaces

Use the check box for the desired physical serial interface.  Clear all of the other interfaces.

Replicate the serial connection/condition.  The resulting trace will be found in:

Management-Analyser > Trace

Last updated: Jan 11, 2024

Filed Under


Recently Viewed

No recently viewed articles

Did you find this article helpful?