Issue: When configuring a TransPort from the factory defaults, HTTP web pages pages load very slow. This behavior is exhibited in firmware release 5.2.13.4
Resolution: To resolve this issue, HTTPS can be used for faster page loading. To enable HTTPS via the CLI,Telnet or SSH in to the TransPort using a client such as PuTTY, and issue the following commands:
services 0 https on
config 0 save
Once this is complete, you can then connect into the Web Interface using HTTPS, and the pages will load at a normal speed.
NOTE: This issue will be addressed in the firmware release following 5.2.13.4 and later.
Last updated:
Mar 19, 2019