When using the Digi USB JTAG-Link (P/N: DG-ACC-JLNK)
with an older revision of the Digi Connect (Wi-)ME (9210) development board, you might experience failure messages:
Could not perform target reset
Failed to connect.
Could not perform custom init sequence.
Known good development board has green silk screen number: 30006002-06 REV A
Known bad development board has green silk screen number: 30006002-05 REV A
fix: buy a new development board DC-ACC-DBME Revision E, 50000882-05 Revision D, 55001086-06 Revision A or newer
Last updated:
Sep 27, 2024