Home/Support / Knowledge Base / RADIUS authentication fails on socket connection to a Portserver or Digi One serial port.

RADIUS authentication fails on socket connection to a Portserver or Digi One serial port.

Setting up a Portserver or Digi One serial port to allow radius authentication of inbound socket connections to the port (example shown for port 16) requires the following configuration:

  • set auth ip=0 login=16 unrestricted=1-15
  • set port dev=prn range=16
The RADIUS Server requires that attribute "Outbound-User"  be configured for any users which will be reverse telneting to the port.
Last updated: Aug 08, 2017

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us