Home/Support / Knowledge Base / What Gage Wire is Used for the Power Input of Digi One IA RealPort

What Gage Wire is Used for the Power Input of Digi One IA RealPort

The simple answer is anything from 16-20 AWG should be fine.  The smaller the number, the larger the wire and more current capacity.  16 is about the largest that will fit into the terminal.  The max current a DOIARP should ever draw is about 900mA.  Even 22-24 AWG can usually handle the current, but smaller wires are less durable and tend to break easily.
Last updated: Aug 23, 2017

Filed Under

Network

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us