X-CTU Doesn't Display XBee Cellular Parameters Properly

  1. Download the current firmware that is relevant to the module (version 1005 or greater).  Save this file (.zip) to a known location.  DO NOT unzip this file!  X-CTU is looking for a .zip file.
  2. In X-CTU, from the Help (question mark) menu select “Update the Radio Firmware Library”
  3. Click on “Local File”, use the Browse button to select the current firmware .zip file you just downloaded, then click OK to start the update
  4. (You may be warned that the firmware is already installed. If so, click OK to proceed.)
  5. The firmware is then reinstalled, click OK to finish and you’re done!
Last updated: Aug 23, 2017

Filed Under

RFRF Dev kits

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us