Home/Support / Knowledge Base / AnywhereUSB firmware recovery procedure

AnywhereUSB firmware recovery procedure

This recovery process re-flashes the firmware to an AnywhereUSB as a last resort (before potentially RMA'ing the unit) and is intended for situations like:

1. Powered down or rebooted AWUSB during a traditional firmware update.

2. AWUSB System Status LED is doing something abnormal (anything other than blinking slow Green), even after it's powered on without any USB devices attached and without a network cable attached.

Download links for each model (at this time the AWUSB/5 M is missing):

ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw14Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw2Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Aw5g2Ser.zip
ftp://jmcbane_ro:1readonly!@digiftp.digi.com/AWUSB/recovery/Awts44Ser.zip
Last updated: Aug 08, 2017

Recently Viewed Articles

No recently viewed articles
Contact a Digi expert and get started today! Contact Us